DORA-001

Cassini Radar Instrument Team

 

Cassini Radar Burst Ordered Data

Products SIS

Version 1.5

Bryan Stiles

September 27, 2005

Jet Propulsion Laboratory

California Institute of Technology

NASA

D-27891

Document Log

Revision

Date

Revised

Pages

Description

Revised By

02/28/2004

All

Original

B. Stiles

03/15/2004

14, 39, 77,78

Added num_bursts_in_flight data field to engineering data segment to handle a special case used in distant scatterometry.

B. Stiles

02/28/2005

14,15, 18, 26, 30, 43,79,103

Added mention that product_id is filename-extension to Table 5. Changed definition of t_sc_clock in intermediate data segment. Cleaned up various typos. Removed "processable bit" (bit 6) of engineer_qual_flag as it was redundant. Explained that spacecraft clock counts are not exactly one second. Added a RINGS target. Provided more details on when science data segment fields will be archived. Modified PRODUCER_FULL_NAME and PRODUCER_INSTITUTION_NAME values. Set data types of altimeter_range_profile_start and altimeter_range_profile_step to real32 in the Appendix. Now they agree with the start byte table.

B. Stiles

05/16/2005

Signature page, 14, 15,23,26,30

Removed PDS program manager for signture page, Removed DATA_TAKE_NO keyword from labels. Documented two unusual data cases 1) Compressed Scatterometer Mode, 2) Radio frequency source scans.

B. Stiles

06/27/2005

Page 34

Corrected erroneous SBDR record length of 1204 bytes to the correct length of 1273 bytes.

B. Stiles

06/29/2005

24,34

Corrected inaccurate reference to DOM to TDS, SBDR record length is 1272 bytes. (1273 is start byte of echo data)

B. Stiles

09/27/2005

21,26,30, 42,99,103

Slight modofication to filename and PRODUCT_ID format. Altimeter data field name and definition changed to height_above_surface from range_to_target. Minor typos corrected.

B. Stiles

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Table of Contents

1 INTRODUCTION 8

1.1 Purpose and Scope 8

1.2 Applicable Documents (References) 8

1.3 Relationships with Other Interfaces 9

2 DATA PRODUCT CHARACTERISTICS AND ENVIRONMENT 10

2.1 Instrument Overview 10

2.3 Data Products Description 10

2.3.1 Engineering Data Segment 12

2.3.2 Intermediate Level Data Segment 14

2.3.3 Science Data Segment 17

2.3.4 Sampled Echo Data 23

2.3.5 Altimeter Profile 23

2.4 Data Processing 24

2.4.1 Data Product Generation 24

2.4.2 Science Processing and Calibration Algorithms 24

2.4.3 Data Flow 24

2.4.4 Labeling and Identification 25

2.5 Standards Used in Generating Data Products 27

2.5.1 Coordinate Systems 27

2.5.2 PDS Standards 27

2.5.3 Data Storage Conventions 28

2.6 Data Validation 28

3 Applicable PDS Software Tools 29

4 Appendix A Example LBDR PDS Label 30

5 Appendix B.1 Partial Contents of SBDR.FMT 32

6 Appendix B.2 Contents of LBDR.FMT 33

7 Appendix B.3 Contents of ABDR.FMT 33

8 Appendix C Detailed Description of Fields in SBDR record 34

8.1 SBDR Start Byte Table 34

8.2 List of SBDR Field Descriptions 43

8.2.1 Engineering Data Segment Fields 43

8.2.2 Intermediate Level Data Segment Fields 79

8.2.3 Science Data Segment Fields 92

INTRODUCTION

  1. Purpose and Scope

The purpose of this Data Product Software Interface Specification (SIS) is to provide users of the Cassini Burst Ordered Data Products (BODP) with a detailed description of the products and a description of how they were generated. Cassini Burst Ordered Data Products are data sets at various stages of processing which are organized as time-ordered records for each burst. The products described in this SIS are listed in See Cassini Radar Burst Ordered Data Products.

 

Cassini Radar Burst Ordered Data Products

Data Set ID

Name

Description

CO-V/E/J/S-RADAR-3-SBDR-V1.0

Short Burst Data Records

Instrument Telemetry and Calibrated Science Data in Burst Order. Excludes time sampled echo data and altimeter profiles.

CO-V/E/J/S-RADAR-3-LBDR-V1.0

Long Burst Data Records

Same as SBDR but includes time sampled echo data.

CO-SSA-RADAR-3-ABDR-V1.0

Altimetry Burst Data Records

Same as SBDR but includes altimeter profiles.

This SIS is intended to provide enough information to enable users to read and understand the Cassini Burst Ordered Data Products. The users for whom this SIS is intended are software developers, engineers, and scientists interested in accessing and using these products.

This Data Product SIS describes how Cassini Radar Burst Ordered Data Products were processed, formatted, labeled, and uniquely identified. The document discusses standards used in generating the product and software that may be used to access the product. The data product structure and organization is described in sufficient detail to enable a user to read the product.

 

A description of the BODP product formats and the data contained in them is provided in See Data Products Description. This description is at a level of detail which we expect to be useful for the majority of users. For examples of PDS labels (headers) see Appendices A and B. For a detailed description of all the data fields in the BODP products and a table of their locations in the file see Appendix C. The length of records can also be found in Appendix C as well as in the attached PDS label of each BODP file.

 

  1. Applicable Documents (References)

This Data Product SIS is responsive to the following Cassini documents:

1) Project Data Management Plan, JPL D-12560, PD 699-061, Rev. B, April 1999, and Science Management Plan, JPL D-9178, PD 699-006, July 1999.

2) Cassini RADAR Basic Image Data Records SIS, JPL D-27889, Feb 2004, Version 1.0.

3) Cassini/Huygens Archive Plan for Science Data, JPL D-15976, 699-068.

4) SIS for Cassini RADAR Digital Map Products, JPL D-xxxx, Version 1.0

This SIS is also consistent with the following Planetary Data System documents:

5) Planetary Data System Data Preparation Workbook, Version 3.1, February 17, 1995, JPL D-7669, Part 1.

6) Planetary Data System Data Standards Reference, June 15, 2001, Version 3.4, JPL D-7669, Part 2.

7) SIS for Cassini Radar Basic Image Data Records, JPL Document #D-27889

8) Volume SIS for Cassini Radar Digital Map Products, JPL Document #D-30412, USGS #IO-AR-014

9) SIS for Cassini Radar Digital Map Products, JPL Document #D-30411, USGS #IO-AR-015

10) Volume SIS for Cassini Radar Instrument Team Data Products, Document # D-27890

 

Finally, this SIS is meant to be consistent with the contract negotiated between the Cassini Project and the Cassini RADAR Experiment Principal Investigator (PI) in which data products and documentation are explicitly defined as deliverable products.

 

  1. Relationships with Other Interfaces

There are two other data product sets which contain data from the Cassini Radar instrument. These are:

The Basic Image Data Records (BIDR) and

The Digital Map Products (DMP)

 

Both of these product sets are downstream from the data products described in this document. The Cassini Radar Instrument team is responsible for developing and documenting the BIDR data. See SIS [7].

 

Randolph Kirk of the US Geological Survey is responsible for developing and documenting the DMP data. The relevant SIS's are[8] and [9].

 

Another relevant document is that which describes the volume which contains BODP and BIDR data is [10].

DATA PRODUCT CHARACTERISTICS AND ENVIRONMENT

  1. Instrument Overview

The Cassini RADAR is a facility instrument on the Cassini Orbiter. It is capable of passive (radiometer) and active (scatterometer, altimeter, SAR imaging) operation. During active mode operation interleaved passive measurements are also obtained.

The primary target for Cassini Radar observations is Titan, the largest Saturnian moon. Due to its thick hazy atmosphere, Titan's surface was not imaged successfully by the Pioneer or Voyager spacecraft, though atmospheric "windows" in the near infrared have been exploited by the Hubble Space Telescope and earth-based telescopes to produce low-resolution albedo maps of part of the surface. The Cassini radar instrument will obtain backscatter and altimeter sounding measurements of portions of Titan's surface. High resolution synthetic aperture radar (SAR) backscatter images of 15% of Titan's surface will be obtained. Radiometer measurements covering the entire surface of Titan will also be acquired.

Instrument Description Summary

Instrument Type:

Radar

Modes:

Imaging (13.78 GHz; 0.425 MHz & 0.85 MHz bandwidth)

Altimeter(13.78 GHz; 4.25 MHz bandwidth)

Scatterometer(13.78 GHz; 0.1 MHz bandwidth)

Radiometer(13.78 GHz; 135 MHz bandwidth)

Number of nominal Operational Periods:

One (1) per selected flyby of Titan (approximately 12 to 22 flybys, total)

Duration of nominal Operational Period:

From 300 minutes before to 300 minutes after closest approach to Titan for prime operation.

Peak Power:

86 W

Data Rates:

1 kbps: Radiometer only

30 kbps: Altimeter & Scatterometer / Radiometer

365 kbps: SAR Imaging / Radiometer

  1. Data Products Description

This document describes the data included in the Burst Ordered Data Products. Burst Ordered Data Products (BODP) are comprehensive data files that include engineering telemetry, radar operational parameters, raw echo data, instrument viewing geometry, and calibrated science data. The BODP files contain time-ordered fixed length records. Each record corresponds to the full set of relevant data for an individual radar burst. The Cassini Radar is operated in "burst mode", which means the radar transmits a number of pulses in sequence then waits to receive the return signals. "Burst" is a descriptive term for the train of pulses transmitted by the radar. We use the term "burst" (somewhat unconventionally) to refer to an entire measurement cycle including transmit, receipt of echo, and radiometric (passive) measurements of the naturally occurring radiation emitted from the surface. In fact, even when the transmitter is turned off and only passive measurements are made we still refer to the measurement cycle as a burst.

 

Burst Ordered Data Products are fixed header length, fixed record length files. The header is an attached PDS label. See See Labeling and Identification for a description of BODP attached PDS labels and Appendix A and B for examples. Records are rows in a table. Each data field is a column. All one needs to know to read a particular data value from a particular data field is the header length, the record size, and the byte offset of the data field within the record. Since a UTC time tag is included in each record, it is a simple matter to restrict the data one reads to a particular time interval. In order to further facilitate temporal segmentation of the data, we plan to provide a Cassini Radar Transition (CRT) file for each Titan pass. This file will maintain a temporally ordered list of the times and transition types for all scan start and end events, and radar mode transitions (e.g., radiometry to scatterometry mode switch). See the Volume SIS for more information about CRT file formats.

 

The BODP comprise three separate data sets, including the Short Burst Data Record (SBDR) the Long Burst Data Record (LBDR) and the Altimeter Burst Data Record (ABDR). The only difference between the three formats is whether or not two data fields are included: the sampled echo data, and the altimeter profile. The altimeter profile is an intermediate processing result between sampled echo data and a final altitude estimate. LBDRs include the echo data but not the altimeter profile. ABDRs include the altimeter profile but not the echo data. SBDRs include neither. These trivial differences necessitate different data sets because the two fields in question are much larger than all the other data fields combined. The majority of the bursts in a typical Titan pass are passive measurements. These bursts do not produce echo data or altimeter profiles. Of the active mode bursts most are not in altimeter mode so no altimeter profiles are produced. Including these two data fields when they are invalid would ridiculously increase the size of the archived data. The alternative of having variable length records was deemed to overly complicate data archiving and analysis procedures. Maintaining three data sets reduces data volume while allowing record lengths to remain fixed.

 

Consider a typical Titan pass. When approaching Titan, first only radiometer measurements are obtained, then the transmitter is turned on and scatterometer measurements are added. When Titan is close enough for useful altimetry, the radar goes into altimeter mode. Finally 15 minutes prior to closest approach SAR processing begins. On the outbound portion of the pass these transitions occur in reverse. When the data from this pass is received on the ground, it will be processed in the following manner. A SBDR record is produced for every burst throughout the pass. A LBDR file is produced which only contains records for the middle portion of the pass during which the transmitter was on. (Sometimes it is necessary to create multiple LBDR files in order to avoid file lengths > 2Gbytes which are problematic for older operating systems.) An ABDR file is produced which contains records for only the two periods (one inbound, one outbound) in which the radar is in altimeter mode. If desired, bursts can be easily matched across data sets. One data field in each record is a burst identifier, which uniquely distinguishes a burst from all other bursts in the mission. Records in different data sets that correspond to the same burst have the same burst ID.

 

Excepting unitless quantities and raw telemetry, all data fields are stored in standard units:

1 time in seconds

2 frequency in Hertz

3 power in Watts

4 current in Amps

5 voltage in Volts

6 length in kilometers

7 temperature in Kelvin

8 angles in degrees

9 velocity in kilometers per second

10 angular velocity in degrees per second

11 energy in Joules

 

The SBDR data record is divided into three consecutive segments from three different levels of processing: 1) the engineering data segment, 2) the intermediate level data segment (mostly spacecraft geometry), and 3) the science data segment (brightness temperature, backscatter, measurement geometry, etc.). In See Engineering Data Segment-See Science Data Segment we describe a subset of the fields in each of these data segments which is likely to be of interest to the average user. The engineering data segment contains a complete copy of the telemetry data downlinked from the spacecraft and thus has the most fields by far. It includes temperatures, instrument instructions, operational parameters of the radar, and raw measurements (i.e., unnormalized radiometer counts.) For the sake of conciseness, we avoid discussing many of these fields here. For a full description of all SBDR fields see Appendix C. In See Sampled Echo Data we describe the raw active mode data, and in See Altimeter Profile we describe the altimeter profile.

 

  1. Engineering Data Segment

The engineering data segment includes a copy of the radar telemetry contained in the Engineering Ground Support Equipment (EGSE) files obtained from the spacecraft data downlinks. This data is stored to allow investigators to access as much of the information obtained by the spacecraft as possible. Telemetry data is decoded and converted to standard units. The most important fields in this segment are the radar operational parameters and the raw radiometer data. The following table documents each of these fields. Each field in the table is 4 bytes long.

Fields of Interest in the Engineering Data Segment

Data Field Name

Data Type

Description

burst_id

integer

An integer which uniquely identifies each burst throughout the mission.

rx_window_pri

integer

The receive window length in units of PRI (pulse repetition interval).

radar_mode

integer

The operational mode of the radar.

0 = Scatterometry, 1 = Altimetry, 2 = Low resolution SAR,

3 = High resolution SAR, 4 = Radiometer only. Adding 8 to any of these values indicates auto-gain is enabled. Auto-gain is N/A for Radiometer only mode.

adc_rate

float

Analog to Digital Converter sampling rate in Hz. This is the rate at which the echo is sampled. Since Cassini uses video offset rather than IQ sampling. Each sample is a real (not complex) value.

antenna_int_period

float

The length of a single radiometer antenna measurement window in seconds.

chirp_time_step

float

Chirp step duration in seconds.

num_rad_meas

float

Number of radiometer antenna measurement windows.

num_chirp_steps

integer

Number of chirp steps. One step means two different frequencies before and after the step, so that the number of distinct frequencies is one more than the number of steps.

chirp_length

float

Total length of chirp in seconds. This is equivalent to the width (during transmission) of an individual pulse.

chirp_freq_step

float

The change in frequency for each chirp step in Hz.

num_pulses

integer

Number of pulses transmitted.

burst_period

float

Time in seconds between consecutive bursts.

PRI

float

Pulse repetition interval in seconds.

rx_window_delay

float

Time in seconds from start of burst to start of receive window.

chirp_start_freq

float

Starting frequency of chirp in Hz.

raw_res_load_meas

integer

Resistive load measurement (raw counts)

raw_antenna_meas

integer

Radiometer antenna measurement summed over all windows (raw counts).

raw_noise_diode_meas

integer

Noise diode measurement (raw counts).

noise_diode_int_period

float

The length of the noise diode measurement window in seconds.

res_load_int_period

float

The length of the resistive load measurement window in seconds.

baq_mode

integer

A flag which identifies the method used to compress the raw active mode data. Usually this value is unimportant to the user because the echo data has been decompressed. When the value is 3, however, the raw echo data has a special meaning. See below.

num_bursts_in_flight

integer

Number of bursts transmitted with a single round trip time. The value is almost always 1. In this case, all the fields in the record correspond to the same measurement. For more details see See num_bursts_in_flight.

raw_active_mode_length

integer

Number of valid data values in the time sampled echo data array after decompression.

raw_active_mode_rms

float

Root mean square of the time sampled echo data after decompression.

 

  1. Intermediate Level Data Segment

The Intermediate Level Data Segment contains timing and spacecraft geometry information which is computed using various NAIF kernel files in addition to the EGSE raw radar telemetry file. It also contains several temperatures which were obtained from ancillary spacecraft temperature telemetry files.

The SPICE geometry library is used to compute spacecraft ephemeris and attitude information in two coordinate frames: An inertial frame (J2000) centered on the target (typically Titan), and the target body fixed frame (TBF). Although both frames are centered on the target, the orientation of the frames differ. The TBF frame maintains a constant orientation with respect to any point on the surface of the target. For example, if the target were Earth, the TBF coordinates of the point 100 m above the Washington monument would not change with time. The inertial frame coordinate system is the standard J2000 coordinate system translated so that it is centered at the target's (Titan's) center at the time of the start of the burst.

 

For observations of other icy satellites, Jupiter, Saturn, Earth, or Venus, the target will be the body in question and the J2000 and TBF coordinate systems will be defined accordingly. (Ring observations will have the target "RINGS" but the TBF coordinate system will be IAU_SATURN, the official IAU Saturn body fixed coordinate system.) Some observations will be distant microwave sources or cold sky calibration for these cases the s/c geometry will be Earth centered for J2000 and the TBF fields will have special meaning. TBF fields for cold sky calibrations are invalid. For microwave source scans,TBF space craft position is a unit vector pointing from the spacecraft to the microwave source, spacecraft velocity is 0, and all other TBF parameters default to J2000 values. Microwave source scans are readily identified because the target_name fields contains a string designating the microwave source (i.e. ORION, M15, etc) rather than a solar system body.Text (character string) fields for the name of the target and the official name of the target body fixed coordinate frame are reported for each burst.

The data fields in this segment include time at start of burst, spacecraft position and velocity, the direction vectors of the axes of the spacecraft coordinate system, and the angular velocity vector of the spacecraft.

The following table documents each field in detail. Geometry information is often expressed as three dimensional vectors. Such information is stored as three data fields: one for each of the x, y, and z components. In the table only the x components are listed. X- component data field names end in "_x" (e.g., sc_vel_j2000_x), y-component field names in "_y", and z-component field names in "_z". The three components are always consecutive in x, y, z order. Fields with data type "double" are real valued 8 byte numbers. UTC time strings are 24 bytes long. Other strings are multiples of 4 bytes long as specified in the table. All other fields are four bytes long.

Fields of Interest in the Intermediate Level Data Segment

Data Field Name

Data Type

Description

engineer_qual_flag

integer

Flag to indicate quality of intermediate level data segment. Bit 0 is the LSB. The following table indicates the meaning of setting each bit to 1.

 

Bit 0 Bad or missing s/c attitude data

Bit 1 Other bad of missing geometry data

Bit 2 Missing temperature telemetry (scwg_tmp)

Bit 3 Missing temperature telemetry (feed_tmp)

Bit 4 Missing temperature telemetry (hga_tmp)

Bit 5 Downlink error in raw data file

 

The other 26 bits are not currently used but are available for future use.

t_sc_clock

double

Encoded spacecraft clock time at start of burst. This value is used by the SPICE software employed by the Cassini Navigation Team.

t_ephem_time

double

Time at start of burst expressed in seconds since 12:00 AM Jan. 1, 2000.

t_utc_ymd

string

Time at start of burst expressed as a UTC time tag

in yyyy-mm-ddThh:mm:ss.sss format. One blank space is padded at the end of the string to make certain the record length is a multiple of 4 bytes.

t_utc_doy

string

Time at start of burst expressed as a UTC time tag

in yyyy-doyThh:mm:ss.sss format. Three blank spaces are padded at the end of the string to make certain the record length is a multiple of 4 bytes.

transmit_time_offset

double

Time offset in seconds from t_ephem_time at which the leading edge of the first transmit pulse leaves the antenna.

time_from_closest_approach

double

t_ephem_time - closest_approach_time

time_from_epoch

double

t_ephem_time - epoch_time

target_name

string

Name of body observed during this burst (measurement cycle). The string is 16 characters (bytes) long including space characters padded at the end.

tbf_frame_name

string

Name of the the target body fixed frame in the NAIF SPICE system. The string is 24 characters (bytes) long including space characters padded at the end.

pole_right_ascension

double

Right ascension (east positive longitude in the target centered J2000 celestial sphere) of the North pole of the target body in degrees at the epoch time.

pole_declination

double

Declination (latitude in the target centered J2000 celestial sphere) of the North pole of the target body in degrees at the epoch time.

target_rotation_rate

double

Positive east rotation rate in degrees/s of the target body about its axis in the target centered J2000 inertial coordinate system.

target_rotation_angle

double

The rotation about the north pole of the target body required to complete the transformation from J2000 to target body fixed coordinates.

 

Target body fixed coordinates at epoch_time can be computed by successively applying the following three rotations to the J2000 coordinates: pole_right_ascension degrees about the J2000 Z-axis, 90 - pole_declination degrees about the once-rotated Y-axis, and target_rotation_angle degrees about the twice rotated Z-axis.

 

An addional rotation of target_rotation_rate * time_from_epoch degrees about the thrice rotated Z-axis yields the target body fixed coordinates at t_ephem_time.

beam_number

integer

The number (1-5) of the beam for which measurements are obtained during this burst.

sc_pos_j2000_x

double

x-component of spacecraft position in target-centered J2000 inertial coordinate system.

sc_vel_j2000_x

double

x component of spacecraft velocity in target-centered J2000 inertial coordinate system.

sc_pos_target_x

double

x-component of spacecraft position in target body fixed (TBF) coordinate system.

sc_vel_target_x

double

x-component of spacecraft velocity in target body fixed (TBF) coordinate system.

sc_x_axis_j2000_x

double

x-component of direction vector representing the spacecraft coordinate system's x-axis in the J2000 coordinate system. This is a unitless quantity. The vector magnitude is one.

sc_y_axis_j2000_x

double

x-component of direction vector representing the spacecraft coordinate system's y-axis in the J2000 coordinate system. This is a unitless quantity. The vector magnitude is one.

sc_z_axis_j2000_x

double

x-component of direction vector representing the spacecraft coordinate system's z-axis in the J2000 coordinate system. This is a unitless quantity. The vector magnitude is one.

sc_x_axis_target_x

double

x-component of direction vector representing the spacecraft coordinate system's x-axis in the TBF coordinate system. This is a unitless quantity. The vector magnitude is one.

sc_y_axis_target_x

double

x-component of direction vector representing the spacecraft coordinate system's y-axis in the TBF coordinate system. This is a unitless quantity. The vector magnitude is one.

sc_z_axis_target_x

double

x-component of direction vector representing the spacecraft coordinate system's z-axis in the TBF coordinate system. This is a unitless quantity. The vector magnitude is one.

rot_vel_j2000_x

double

x-component of spacecraft angular velocity vector in J2000 coordinate system. Units are degrees/s.

rot_vel_target_x

double

x-component of spacecraft angular velocity vector in TBF coordinate system. Units are degrees/s.

 

  1. Science Data Segment

Three primary estimates of geophysical quantities are available in the science data segment: 1) the normalized backscatter cross-section σ0 obtained from the scatterometer measurement, 2) the antenna temperature determined from the radiometer measurement, and 3) the range to target (RTT=distance between the sensor and the closest surface point) computed from the altimeter measurement. The antenna temperature is computed for every burst. The normalized backscatter cross-section is computed for all bursts with active mode data. The RTT is only computed when the radar is in altimeter mode. The RTT data will not be computed initially, until such time as an altimeter processor is developed. During the first portion of the tour the RTT data field will serve as a placeholder only. In addition to these primary values additional ancillary parameters are also computed. The ancillary parameters include intermediate values, (e.g., receiver temperature, total echo energy, system gain, etc.) analytical estimates of the standard deviation of the residual error in each of the three primary measurements, and measurement geometry. A non-physical "corrected" version of σ0 is also computed in which the effects of incidence angle are removed in an ad hoc manner. This quantity is produced in order to ease the identification of surface features from σ0 maps. Science team input will be required to specify the incidence angle correction method. Synthetic Aperture Radar (SAR) anciliary data is also included in the science data segment when available. The SAR images themselves are stored in the Basic Image Data Record (BIDR) files.

Measurement geometry information is available for both the active and passive mode measurements. Some of the active and passive mode quantities are likely to be identical (e.g. polarization orientation angle). However, separate data fields are reported, because the differences in the passive and active mode measurement times can in principle cause the two cases to differ. Passive geometry is computed for the time corresponding to the midpoint of the passive receiver window (summed radiometer windows). Active mode geometry is computed for the time halfway between the midpoint of the transmission and the midpoint of the active mode receiver window. The full set of measurement geometry for each case includes: the polarization orientation angle, emission/incidence angle, azimuth angle, the measurement centroid, and four points on the 3 dB gain contour of the measurement. The centroid and contour points are specified in latitude and longitude, using the standard west longitude positive geodetic coordinate system sanctioned by the IAU. The geodetic part of the definition is moot since Titan is modeled by a sphere. See [1] and [3] for a more rigorous definition of the coordinate system. The measurement geometry will not be available and will be flagged as invalid for cases in which there is no target body or the measurement extends beyond the limb of the target body. There is no plan to compute the science data segment for non-Titan bodies with the exception of radiometric observations of Saturn and its rings. For other bodies these fields will be flagged as invalid. For most non-Titan icy satellite observations, due to SNR effects, only a single brightness temperature or backscatter measurement will be computable rather than values for each burst. For these observations a single backscatter value and a single antenna temperature value will be reported in the AAREADME.TXT file in the root directory of the volume. (No altimetry data will be obtained for bodies other than Titan.)

The following table summarizes the data fields in the science data segment. All fields are 4 bytes long except doubles which are 8 bytes. When a field is invalid its value is set to zero and the science_qual_flag bits are set accordingly.

Science Data Segment Data Fields

Data Field Name

Data Type

Description

science_qual_flag

integer

Quality flag specifying which of the science data elements are valid. Zero value indicates all data fields are valid. The meaning of a set bit (bit =1) is as follows for each bit. (Bit 0 is the LSB).

 

Bit 0 All passive mode fields are invalid.

Bit 1 All active mode fields are invalid.

Bit 2 All altimeter fields are invalid.

Bit 3 All scatterometer fields are invalid.

Bit 4 All radiometer fields are invalid.

Bit 5 Passive boresight is not on surface.

Bit 6 One or more of passive ellipse points is not on surface.

Bit 7 Active boresight is not on surface.

Bit 8 One or more of active ellipse points is not on surface.

Bit 9 All SAR fields are invalid.

 

Remaining 22 bits are currently unassigned but may be utilized at a later time.

system_gain

float

Coefficient used to convert radiometer counts to antenna temperature.

antenna_temp

float

Antenna contribution to overall system temperature.

receiver_temp

float

Receiver contribution to overall sytem temperature.

ant_temp_std

float

Estimated standard deviation of the residual error in antenna temperature estimate.

pass_geom_time_offset

float

Time offset in seconds from burst reference time (t_ephem_time) for which the passive geometry fields were computed

pass_pol_angle

float

Angle of orientation of the electric field vector about

the look vector during receipt of the passive mode

measurement. Angle is zero when the electric field vector is perpendicular to the plane of incidence as defined by the look vector and the target surface normal, and increases counterclockwise.

pass_emission_angle

float

The angle between the antenna look direction and the surface normal during receipt of the passive mode measurement.

pass_azimuth_angle

float

The direction of the projection of the antenna look vector in the plane tangent to the surface at the measurement centroid, expressed by the angle counterclockwise from East (e.g. North is 90 degrees).

pass_centroid_lon

float

Longitude of the passive (one-way) antenna boresight.

pass_centroid_lat

float

Latitude of the passive (one-way) antenna boresight.

pass_major_width

float

Width of major axis of ellipse representing passive measurement one-way 3-dB gain pattern contour.

pass_minor_width

float

Width of minor axis of ellipse representing passive measurement one-way 3-dB gain pattern contour.

pass_ellipse_pt1_lon

float

Longitude of first point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

pass_ellipse_pt2_lon

float

Longitude of second point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

pass_ellipse_pt3_lon

float

Longitude of third point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

pass_ellipse_pt4_lon

float

Longitude of fourth point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

pass_ellipse_pt1_lat

float

Latitude of first point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

pass_ellipse_pt2_lat

float

Latitude of second point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

pass_ellipse_pt3_lat

float

Latitude of third point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

pass_ellipse_pt4_lat

float

Latitude of fourth point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

num_pulses_received

integer

Number of pulses which were received completely within the echo window. Partial pulses are ignored.

total_echo_energy

float

Estimate of the total energy in the receiver window in Joules.

noise_echo_energy

float

Estimate of the noise contribution to the energy in the receiver window.

x_factor

float

Ratio of received signal energy to normalized backscatter cross-section.

sigma0_uncorrected

float

Normalized backscatter cross-section. Quantity is unitless. Scale is physical (linear) not dB (logarithmic),

sigma0_corrected

float

Normalized backscatter cross-section corrected to minimize dependence on incidence angle. Quantity is unitless. Scale is physical (linear) not dB (logarithmic).

sigma0_uncorrected_std

float

Estimated standard deviation of residual error in normalized backscatter cross-section.

height_above_surface

float

Estimated height of the boresight above the reference surface in km. Computed from the active mode data when the radar is in altimeter mode. For other radar modes this data field is invalid, as indicated by science_qual_flag. Currently a placeholder only, awaiting development of altimeter processor.

has_std

float

Estimated standard deviation of the residual error in the height_above_surface measurement.

act_geom_time_offset

float

Time offset in seconds from burst reference time (t_ephem_time) for which the active geometry fields were computed.

act_pol_angle

float

Angle of orientation of the electric field vector about

the look vector during the active mode

measurement. Angle is zero when the electric field vector is perpendicular to the plane of incidence as defined by the look vector and the target surface normal, and increases counterclockwise. Angle is computed for the time halfway between the transmission midpoint and the midpoint of the active mode receiver window.

act_incidence_angle

float

The angle between the antenna look direction and the surface normal halfway between transmission and receipt of the active mode signal.

act_azimuth_angle

float

The direction of the projection of the antenna look vector in the plane tangent to the surface at the measurement centroid expressed by the angle counterclockwise from East (e.g. North is 90 degrees).

act_centroid_lon

float

Longitude of the active (two-way) antenna boresight.

act_centroid_lat

float

Latitude of the active (two-way) antenna boresight.

act_major_width

float

Width of major axis of ellipse representing active measurement two-way 3-dB gain pattern contour.

act_minor_width

float

Width of minor axis of ellipse representing active measurement two-way 3-dB gain pattern contour.

act_ellipse_pt1_lon

float

Longitude of first point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

act_ellipse_pt2_lon

float

Longitude of second point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

act_ellipse_pt3_lon

float

Longitude of third point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

act_ellipse_pt4_lon

float

Longitude of fourth point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

act_ellipse_pt1_lat

float

Latitude of first point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

act_ellipse_pt2_lat

float

Latitude of second point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

act_ellipse_pt3_lat

float

Latitude of third point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

act_ellipse_pt4_lat

float

Latitude of fourth point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

altimeter_profile_range_start

float

Range of the first altimeter profile value in each pulse.

altimeter_profile_range_step

float

Difference in range between consecutive range bins in altimeter profile.

altimeter_profile_length

integer

Number of valid entries in altimeter profile

sar_azimuth_res

float

Effective SAR image resolution in km along azimuth dimension.

sar_range_res

float

Effective SAR image resolution in km along range dimension.

sar_centroid_bidr_lon

float

Longitude of active measurement centroid in the BIDR oblique cylindrical map projection.

sar_centroid_bidr_lat

float

Latitude of active measurement centroid in the BIDR oblique cylindrical map projection.

  1. Sampled Echo Data

The sampled echo data array is located at the end of each record in the LBDR data files. It constitutes the only difference between SBDR records and LBDR records. The array consists of 32,768 4-byte floating point values. It contains the active mode time-sampled data obtained during the receive window. The data was encoded prior to downlinking from the spacecraft in order to minimize the data transfer rate, and then decoded during the ground processing (the data stored in the array has already been decoded). The length of the array corresponds to the maximum amount of echo data that can ever be obtained from a single burst. Only the first N elements in the array are valid data.These data are N floating point values in the range [-127.5, 127.5] sampled consecutively at a rate of B Hz. N is stored in the raw_active_mode_length data field in the engineering data segment. B is in the adc_rate field in the same segment. The raw_active_mode_rms field (also in the engineering data segment) contains the root mean square of the N sampled echo data values. We suspect that only a few investigators will actually need to make use of the sampled echo data.

There is one special case in which the sampled echo data takes on a different meaning. When the baq_mode field is set to 3 that signifies the compressed scatterometer

mode. In this mode all data samples are not downlinked from the space craft. Instead

the absolute value of the samples are summed across all the pulses in the pulse train. The summation is stored in the sampled echo data array. (Since it is a summation the values may be outside the nominal range.) In this case an additional data value is appended after the N=raw_active_mode_length array. The (N+1)st sample corresponds to the DC offset of the entire pulse train.

  1. Altimeter Profile

The altimeter profile is the range compressed active mode data obtained while the radar is in altimeter mode. It is located at the end of each record in the ABDR files. It is an array of floating point values the length of which is stored in the altimeter_profile_length data field in the science data segment. During range compression the active mode data is decompressed and segmented by pulse. Each pulse is then separately correlated with the real -valued chirped transmit waveform, in order to distribute the energy within each returned pulse into range bins. The range for the first sample of each pulse in the altimeter profile and the range step are data fields in the science data segment. The number of pulses received is stored in the science data segment. Dividing the profile length by the number of pulses yields the number of range bins. The profile array is arranged so that the range bins for each pulse are contiguous in the array (i.e., (Pulse1,Range1), (Pulse1, Range2) ..., (Pulse2, Range1), (Pulse2,Range2), ...).

The altimeter profile is an intermediate result in the altimeter processing.

 

  1. Data Processing

This document uses the "Committee of Data Management and Computation" (CODMAC) data level number system. The data products referred to in this document are "level 3".

 

  1. Data Product Generation

The JPL Cassini RADAR science data products will be produced by the radar processing group in section 334. The pre-processor (part of the radar analysis software (RAS)) creates SBDR and LBDR files for each radar observation (i.e, each Titan pass). Initially these files only contain valid data in the engineering and intermediate level data segments. These files will then be used as inputs for the various science processing routines (SP). Processors for the radiometer and scatterometer are applied as filters to the SBDR and LBDR files. The scatterometer processor puts data into the scatterometer fields in the science data segment. The radiometer processor fills the radiometer data fields. The altimeter processor will generate an ABDR file and populate the altimeter data fields in all the BODP files. The SAR processor will produce a Basic Image Data Record file containing a SAR image and populate the SAR ancilliary data fields in the BODP files. These programs will also apply low level (instrument based) calibration to the resulting data records, but will generally not attempt to perform data-driven calibration techniques. In some cases, the calibration model will be produced by other RAS software and communicated via configuration file. Configuration files will be archived along with the data. RAS and SP software will ingest telemetry data and other ancillary data (NAIF SPICE files) which are separately archived by other elements of the Cassini project.

 

  1. Science Processing and Calibration Algorithms

When the development of the radiometer, scatterometer, SAR, and altimeter processors is complete, each of these algorithms will be summarized here. References to peer-reviewed articles will be provided when available to further document the algorithms employed along with the calibration methods contained in those algorithms.

 

  1. Data Flow

Cassini RADAR telemetry packets are transmitted to earth along with other spacecraft and instrument telemetry at the conclusion of each data take. The radar data packets are queried from the telemetry data system(TDS) on a computer in the radar testbed which has access to TDS. These packets are placed sequentially into a raw data file. The raw file is initially processed by radar software on the testbed computer which identifies radar science activity blocks (SAB) within the telemetry stream and reformats the data and provides some quick look displays and limit checking. The reformatted data file (L0) is then delivered to the radar processing group for processing by RAS and then SP. Temperature telemetry files from the spacecraft are also queried from TDS and delivered to the processing group for RAS and SP to use. All other ancillary data is obtained from SPICE kernel files which are delivered by different elements of the project to an ftp site. These files are separately archived into the PDS system. The RAS pre-processor reads the radar L0 file, associated temperature telemetry files, and the SPICE kernel files and all relevant data are placed into the SBDR/LBDR engineering and intermediate level data segments. The science processors ingest the SBDR/LBDR files and produce mode specific science data products (and modify science data segment fields). These products will be delivered to PDS and to the mapping group at the United State Geological Survey (USGS) site (via FTP) in Flagstaff AZ. There, the data products will be processed into higher level map products documented in the DMP SIS. During the primary mission (July 2004 through July 2008) approximately 18 Titan flyby's will have radar data takes. In addition, various other radar observations will be conducted on other icy satellites, the rings, and Saturn's atmosphere. The processing chain will be operated about once per month to produce the relevant science data products for each data take.

  1. Labeling and Identification

The data products discussed in this SIS all have attached PDS labels. For a general description of PDS labels and for the file naming conventions for this data set see the Volume SIS.

A PDS label is object-oriented and describes the objects in the data file. The PDS label contains keywords for product identification, and storing and organizing ancillary data. The label also contains descriptive information needed to interpret or process the data objects in the file.

PDS labels are written in Object Description Language (ODL) [ref. 5]. PDS label statements have the form of "keyword = value". Each label statement is terminated with a carriage return character (ASCII 13) and a line feed character (ASCII 10) sequence to allow the label to be read by many operating systems. Pointer statements with the following format are used to indicate the location of data objects in the file:

^object = location

where the carat character (^, also called a pointer) is followed by the name of the specific data object. The location is the starting record number for the data object within the file. The keywords used are listed in the following table. The text following the description keyword includes several UTC times of interest in day of year (doy) format including the closest approach time of the pass, the trigger time of the radar instrument command sequence, and the epoch time (usually the same as the closest approach time). See Appendices A and B for example PDS labels.

 

 

PDS Label Keywords

Keyword

Values

Description

PDS_VERSION_ID

"PDS3"

PDS Version Number

RECORD_TYPE

"FIXED_LENGTH"

Records are fixed length for each product type.

RECORD_BYTES

ASCII INTEGER

Number of bytes in a record.

FILE_RECORDS

ASCII INTEGER

Number of records in entire file.

LABEL_RECORDS

ASCII INTEGER

Number of records comprising the label (header).

DATA_SET_ID

See Table 1.

ID code of Burst Ordered

Data Product Set

DATA_SET_NAME

"CASSINI RADAR SHORT BURST DATA RECORD"

Name of the data set

PRODUCER_ID

JPL

Abbreviation of producer organization.

PRODUCER_FULL_NAME

"INST LEAD CHARLES ELACHI CONTACT BRYAN STILES"

Name of individual responsible for producing data set.

PRODUCER_INSTITUTION_ NAME

"JET PROPULSION

LABORATORY"

Name of producer organization

PRODUCT_ID

"XXXX_YY_DZZZ_VNN"

This is the filename of the product without its extension.

 

xxxx = The acronym for the data set LBDR, SBDR, or ABDR

 

yy = The radar mode of the data in the file represented as a two digit decimal integer between 00 and 15. This value represents a 4-bit binary flagging scheme. Bit 0 (LSB) = 1 means radiometer only mode data is present in the file. Bit 1 = 1 means scatterometer mode data is present in the file Bit 2 = 1 means altimeter mode data is present in the file. Bit 3 = 1 means SAR mode data is present in the file. The only yy values expected to occur are 01=radiometer mode only, 02=scatterometer mode only, 07= all but SAR modes, 08= SAR mode only, and 15=all four modes, but all possibilities are covered.

zzz = 3 digit radar observation counter. One observation corresponds to a single up-linked radar command sequence. For example, a Titan fly-by is one observation.

 

nn= 2 digit version number

 

PRODUCT_VERSION_ID

NN

Two digit integer indicating the version number of a product file.

INSTRUMENT_HOST_NAME

"CASSINI ORBITER"

Name of host spacecraft

INSTRUMENT_HOST_ID

"CO"

Abbreviation of host spacecraft name

INSTRUMENT_NAME

"CASSINI RADAR"

Name of instrument

INSTRUMENT_ID

"RADAR"

Abbreviation of instrument name

TARGET_NAME

"TITAN"

Target of observation

START_TIME

YYYY-DOYTHH:MM:SS.sss

Earliest time data acquired

STOP_TIME

YYYY-DOYTHH:MM:SS.sss

Latest time data acquired

SPACECRAFT_CLOCK_START_COUNT

ASCII INTEGER

Earliest S/C clock count

SPACECRAFT_CLOCK_STOP_COUNT

ASCII INTEGER

Latest S/C clock count

PRODUCT_CREATION_TIME

 

YYYY-DOYTHH:MM:SS.sss

Time data file was created

MISSION_NAME

"CASSINI-HUYGENS"

Official name of Cassini Mission

SOFTWARE_VERSION_ID

"V1.0"

Version of processor software

DESCRIPTION

TEXT

Description of data file

PROCESSING_HISTORY_

TEXT

TEXT

Description of chain of processing which created file

 

 

  1. Standards Used in Generating Data Products
  2. Coordinate Systems

Geometrical data such as spacecraft position, velocity and attitude, are reported in the inertial target-centered J2000 coordinate frame as well as in a target body fixed (TBF) rotating frame. Measurement locations are reported in theTBF frame as planetodetic surface coordinates (latitude and longitude). The PDS Navigation and Ancillary Information Facility (NAIF) definitions are used for the frames. The TBF frame for each target is defined in the NAIF planetary kernel file for the Saturnian system. This file will be updated during tour as Cassini observations improve the accuracy of the trajectories of bodies in the Saturnian system. For convenience, the set of angles required to transform coordinates from the inertial frame to the target body fixed (TBF) frame is alo included in the BODP files. (See See Science Data Segment.)

  1. PDS Standards

The Cassini Burst Ordered Data Products comply with the Planetary Data System standards for file formats and labels, as specified in the PDS Standards Reference [4].

  1. Data Storage Conventions

The Cassini Burst Ordered Data Products contain binary data. Data is stored as 32 bit integers, 32-bit IEEE floating point, or 64-bit IEEE floating point as appropriate. The files are generated on a PC running the Linux operating system so little endian byte ordering is employed. The PDS label sections are stored as ASCII character strings conforming to the conventions outlined in the PDS Standards Reference [4].

  1. Data Validation

Cassini Radar Burst Ordered Data products will be validated before being released to the PDS. Validation is accomplished in two parts: validation for scientific integrity and validation for compliance with PDS standards. The Cassini Science Archive Working Group (SAWG) Data Validation Team will oversee validation, which includes representatives from Radar Team and PDS. Science team members are expected to conduct validation for scientific integrity in the course of their analysis of the products. The details of the science validation process are the responsibility of the Radar Science Team.

 

Validation for compliance with PDS standards is also the responsibility of the Radar Science Team with help from the PDS Imaging Node that will receive the data products. PDS will provide software tools, examples, and advice to help make this part of the validation as efficient as possible.

 

A data set will pass a peer review before it is accepted by PDS. The Cassini Radar Team and the associated PDS Node will convene a peer review committee made up of scientists and data engineers. The committee will examine the data set to make sure it is complete, meets the product specifications as defined in the SIS. The committee will include a PDS representative to ensure that the data set is in compliance with PDS standards.

 

Applicable PDS Software Tools

PDS-labeled tables can be viewed with the program NASAView developed by the PDS and available for a variety of computer platforms from the PDS web site at

htttp://pdsproto.jpl.nasa.gov/Distribution/license.html. There is no charge for NASAView.

Appendix A Example LBDR PDS Label

 

PDS_VERSION_ID = PDS3

 

/* FILE FORMAT AND LENGTH */

 

RECORD_TYPE = FIXED_LENGTH

RECORD_BYTES = 132276

FILE_RECORDS = 1000

LABEL_RECORDS = 1

 

/* POINTERS TO START RECORDS OF OBJECTS IN FILE */

 

^LBDR_TABLE = 2

 

/* FILE DESCRIPTION */

 

DATA_SET_ID = "CO-V/E/J/S-RADAR-3-LBDR-V1.0"

DATA_SET_NAME = "CASSINI ORBITER RADAR LONG BURST DATA RECORD"

PRODUCER_INSTITUTION_NAME = "JPL CAL TECH"

PRODUCER_ID = JPL

PRODUCER_FULL_NAME = "INST LEAD CHARLES ELACHI CONTACT BRYAN STILES"

PRODUCT_ID = LBDR_IO_D001_V01

PRODUCT_VERSION_ID = 01

INSTRUMENT_HOST_NAME = "CASSINI ORBITER"

INSTRUMENT_HOST_ID = CO

INSTRUMENT_NAME = "CASSINI RADAR"

INSTRUMENT_ID = RADAR

TARGET_NAME = TITAN

START_TIME = YYYY-DOYThh:mm:ss

STOP_TIME = YYYY-DOYThh:mm:ss

SPACECRAFT_CLOCK_START_COUNT = nnnnnnnnn

SPACECRAFT_CLOCK_STOP_COUNT = nnnnnnnnn

PRODUCT_CREATION_TIME = YYYY-DOYThh:mm:ss.sss

MISSION_NAME = "CASSINI-HUYGENS"

SOFTWARE_VERSION_ID = "V1.0"

DESCRIPTION = "CASSINI RADAR LONG BURST DATA RECORD FOR THE TA TITAN PASS WITH CLOSEST APPROACH TIME YYYY-DOYThh:mm:ss.sss TRIGGER TIME YYYY-DOYThh:mm:ss.sss and EPOCH TIME YYYY-DOYThh:mm:ss.sss."

PROCESSING_HISTORY_TEXT="....."

 

/* DESCRIPTIONS OF OBJECTS CONTAINED IN FILE */

 

OBJECT = LBDR_TABLE

INTERCHANGE_FORMAT = BINARY

ROWS = 999

COLUMNS = 236

ROW_BYTES = 132276

^STRUCTURE = "LBDR.FMT"

DESCRIPTION = "This is the table definition for a Cassini Radar Long Burst Data Record,

which includes a Short Burst Data Record (engineering telemetry, spacecraft geometry, and

calibrated science data) plus the raw counts of the sampled echo data."

END_OBJECT = LBDR_TABLE

Appendix B.1 Partial Contents of SBDR.FMT

OBJECT = COLUMN

NAME = SYNC

DATA_TYPE = PC_UNSIGNED_INTEGER

START_BYTE = 1

BYTES = 4

UNIT = "NO UNIT OF MEASUREMENT DEFINED"

END_OBJECT = COLUMN

 

OBJECT = COLUMN

NAME = SPACECRAFT_CLOCK

DATA_TYPE = PC_UNSIGNED_INTEGER

START_BYTE = 5

BYTES = 4

UNIT = "SECOND"

END_OBJECT = COLUMN

 

OBJECT = COLUMN

NAME = BURST_ID

DATA_TYPE = PC_UNSIGNED_INTEGER

START_BYTE = 9

BYTES = 4

UNIT = "NO UNIT OF MEASUREMENT DEFINED"

END_OBJECT = COLUMN

 

OBJECT = COLUMN

NAME = CDS_PICKUP_RATE

DATA_TYPE = PC_REAL

START_BYTE = 13

BYTES = 4

UNIT = "BITS PER SECOND"

END_OBJECT = COLUMN

 

OBJECT = COLUMN

NAME = BURST_START_TIME

DATA_TYPE = PC_REAL

START_BYTE = 17

BYTES = 4

UNIT = "SECOND"

END_OBJECT = COLUMN

 

.(..... Continues for 235 columns totaling 1204 bytes.)

 

Appendix B.2 Contents of LBDR.FMT

^SBDR_STRUCTURE = "SBDR.FMT"

 

OBJECT = COLUMN

NAME = ECHO_DATA

DATA_TYPE = PC_REAL

START_BYTE = 1205

ITEMS = 32768

ITEM_BYTES = 4

DESCRIPTION = "Array of 32,768 real samples of the RADAR echo return. Each real value is a antenna voltage estimate at a particular instant in time. These estimates are proportional to voltage but are expressed in data numbers and need to be converted to engineering units. The values may or may not have passed through a lossy BAQ compression/decompression algorithm. The timing of the samples and other relevant RADAR instrument parameters are included in the engineering data segment of each LBDR record."

END_OBJECT = COLUMN

Appendix B.3 Contents of ABDR.FMT

^SBDR_STRUCTURE = "SBDR.FMT"

 

OBJECT = COLUMN

NAME = RANGE_PROFILE

DATA_TYPE = PC_REAL

START_BYTE = 1205

ITEMS = 32768

ITEM_BYTES = 4

DESCRIPTION = "Array of 32,768 values resulting from range compression of the sampled echo

data counts obtained while in altimeter mode. Detailed description pending altimeter processor development."

END_OBJECT = COLUMN

 

Appendix C Detailed Description of Fields in SBDR record

  1. SBDR Start Byte Table

The following table lists the starting byte of each field in a SBDR record along with long and short names for each field and its length in bytes. The long names are the names used to document the field and the names employed in the PDS format file `SBDR.FMT' (See Appendix B). The short names are values occurring in the ground processing software and are included here to assist the software developers. An SBDR record in 1272 bytes long.

 

 

SBDR Start Byte Table

Long Name

Short Name

Start Byte

Length

sync

sync

1

4

spacecraft_clock

sclk

5

4

burst_id

burst_id

9

4

cds_pickup_rate

scpr

13

4

burst_start_time

brst

17

4

header_tfi

header_tfi

21

4

header_tnc

header_tnc

25

4

header_typ

header_typ

29

4

header_tca

header_tca

33

4

header_tcb

header_tcb

37

4

header_tcc

header_tcc

41

4

pwri

pwri

45

4

vicc

vicc

49

4

vimc

vimc

53

4

tail_len

tail_len

57

4

tail_id

tail_id

61

4

sab_counter

sab_counter

65

4

sab_len

sab_len

69

4

fswm

fswm

73

4

fswc

fswc

77

4

ctbc

ctbc

81

4

rx_window_pri

ctrx

85

4

ctps

ctps

89

4

ctbe

ctbe

93

4

ctps_ctbe

ctps_ctbe

97

4

header_end

header_end

101

4

slow_tfi

slow_tfi

105

4

data_take_number

dtn

109

4

slow_typ

slow_typ

113

4

calibration_source

csr

117

4

radar_mode

r_mode

121

4

sin

sin

125

4

bem

bem

129

4

baq_mode

baq_mode

133

4

tro

tro

137

4

receiver_bandwidth

rc_bw

141

4

adc_rate

adc

145

4

at1_tot

at1_tot

149

4

at3_tot

at3_tot

153

4

at4_tot

at4_tot

157

4

at1_each

at1_each

161

4

at3_each

at3_each

165

4

at4_each

at4_each

169

4

antenna_int_period

rip

173

4

chirp_time_step

csd

177

4

num_rad_meas

rad

181

4

num_chirp_steps

csq

185

4

chirp_length

chirp_length

189

4

chirp_freq_step

slow_cfs

193

4

fast_tfi

fast_tfi

197

4

fin

fin

201

4

fast_type

fast_type

205

4

num_pulses

pul

209

4

bii

bii

213

4

burst_period

bpd

217

4

pri

pri

221

4

rx_window_delay

rwd

225

4

chirp_start_freq

fast_csf

229

4

iebtth

iebtth

233

4

iebttl

iebttl

237

4

bgcalls

bgcalls

241

4

delvmn

delvmn

245

4

delvda

delvda

249

4

delvyr

delvyr

253

4

raw_res_load_meas

cnt_rl

257

4

raw_antenna_meas

cnt_radio

261

4

raw_noise_diode_meas

cnt_nd

265

4

eout

eout

269

4

subr

subr

273

4

space_craft_time

space_craft_time

277

4

noise_diode_int_period

hip

281

4

res_load_int_period

cip

285

4

fwdtmp

fwdtmp

289

4

be1tmp

be1tmp

293

4

be2tmp

be2tmp

297

4

be3tmp

be3tmp

301

4

be4tmp

be4tmp

305

4

be5tmp

be5tmp

309

4

diptmp

diptmp

313

4

rlotmp

rlotmp

317

4

tadcal1

tadcal1

321

4

nsdtmp

nsdtmp

325

4

lnatmp

lnatmp

329

4

evdtmp

evdtmp

333

4

mratmp

mratmp

337

4

mruttm

mruttm

341

4

dcgttm

dcgttm

345

4

cucttm

cucttm

349

4

twttmp

twttmp

353

4

epctmp

epctmp

357

4

tw1ttm

tw1ttm

361

4

ep1ttm

ep1ttm

365

4

p_stmp

p_stmp

369

4

p_sttm

p_sttm

373

4

fguttm

fguttm

377

4

tadcal4

tadcal4

381

4

esstmp

esstmp

385

4

wgb1t1

wgb1t1

389

4

wgb3t1

wgb3t1

393

4

wgb3t2

wgb3t2

397

4

wgb3t3

wgb3t3

401

4

wgb5t1

wgb5t1

405

4

pcutmp

pcutmp

409

4

adctmp

adctmp

413

4

tadcal2

tadcal2

417

4

ecltmp

ecltmp

421

4

cputmp

cputmp

425

4

memtmp

memtmp

429

4

sadctmp

sadctmp

433

4

tadcal3

tadcal3

437

4

frwdpw

frwdpw

441

4

dcgmon

dcgmon

445

4

lpltlm

lpltlm

449

4

nsdcur

nsdcur

453

4

hpapsm

hpapsm

457

4

catcur

catcur

461

4

p_smon

p_smon

465

4

svlsta

svlsta

469

4

usotmp

usotmp

473

4

cpbnkv

cpbnkv

477

4

essvlt

essvlt

481

4

tadcal5

tadcal5

485

4

pcu5v_pos

pcu5v_pos

489

4

pcu5i_pos

pcu5i_pos

493

4

pcu5v_neg

pcu5v_neg

497

4

pcu5i_neg

pcu5i_neg

501

4

pcu15v_pos

pcu15v_pos

505

4

pcu15i_pos

pcu15i_pos

509

4

pcu15v_neg

pcu15v_neg

513

4

pcu15i_neg

pcu15i_neg

517

4

pcu12v_neg

pcu12v_neg

521

4

pcu12i_neg

pcu12i_neg

525

4

pcucur

pcucur

529

4

pllmon

pllmon

533

4

ctu5i

ctu5i

537

4

tadcal6

tadcal6

541

4

pcu9v_pos

pcu9v_pos

545

4

pcu9i_pos

pcu9i_pos

549

4

pcu9v_neg

pcu9v_neg

553

4

pcu9i_neg

pcu9i_neg

557

4

tadcal7

tadcal7

561

4

shpttm

shpttm

565

4

num_bursts_in_flight

num_bursts_in_flight

569

4

raw_active_mode_length

num_radar_data

573

4

raw_active_mode_rms

rms_radar_data

577

4

engineer_qual_flag

qual_flag

581

4

t_sc_clock

t_sclk

585

8

t_ephem_time

t_et

593

8

t_utc_ymd

t_utc_ymd

601

24

t_utc_doy

t_utc_doy

625

24

transmit_time_offset

transmit_time_offset

649

8

time_from_closest_approach

time_from_closest_approach

657

8

time_from_epoch

time_from_epoch

665

8

target_name

target_name

673

16

tbf_frame_name

tbf_frame_name

689

24

pole_right_ascension

pole_right_ascension

713

8

pole_declination

pole_declination

721

8

target_rotation_rate

target_rotation_rate

729

8

target_rotation_angle

target_rotation_angle

737

8

scwg_tmp

scwg_tmp

745

4

feed_tmp

feed_tmp

749

4

hga_tmp

hga_tmp

753

4

beam_number

beam_number

757

4

sc_pos_j2000_x

sc_pos_j2000_x

761

8

sc_pos_j2000_y

sc_pos_j2000_y

769

8

sc_pos_j2000_z

sc_pos_j2000_z

777

8

sc_vel_j2000_x

sc_vel_j2000_x

785

8

sc_vel_j2000_y

sc_vel_j2000_y

793

8

sc_vel_j2000_z

sc_vel_j2000_z

801

8

sc_pos_target_x

sc_pos_target_x

809

8

sc_pos_target_y

sc_pos_target_y

817

8

sc_pos_target_z

sc_pos_target_z

825

8

sc_vel_target_x

sc_vel_target_x

833

8

sc_vel_target_y

sc_vel_target_y

841

8

sc_vel_target_z

sc_vel_target_z

849

8

sc_x_axis_j2000_x

sc_x_axis_j2000_x

857

8

sc_x_axis_j2000_y

sc_x_axis_j2000_y

865

8

sc_x_axis_j2000_z

sc_x_axis_j2000_z

873

8

sc_y_axis_j2000_x

sc_y_axis_j2000_x

881

8

sc_y_axis_j2000_y

sc_y_axis_j2000_y

889

8

sc_y_axis_j2000_z

sc_y_axis_j2000_z

897

8

sc_z_axis_j2000_x

sc_z_axis_j2000_x

905

8

sc_z_axis_j2000_y

sc_z_axis_j2000_y

913

8

sc_z_axis_j2000_z

sc_z_axis_j2000_z

921

8

sc_x_axis_target_x

sc_x_axis_target_x

929

8

sc_x_axis_target_y

sc_x_axis_target_y

937

8

sc_x_axis_target_z

sc_x_axis_target_z

945

8

sc_y_axis_target_x

sc_y_axis_target_x

953

8

sc_y_axis_target_y

sc_y_axis_target_y

961

8

sc_y_axis_target_z

sc_y_axis_target_z

969

8

sc_z_axis_target_x

sc_z_axis_target_x

977

8

sc_z_axis_target_y

sc_z_axis_target_y

985

8

sc_z_axis_target_z

sc_z_axis_target_z

993

8

rot_vel_j2000_x

rot_vel_j2000_x

1001

8

rot_vel_j2000_y

rot_vel_j2000_y

1009

8

rot_vel_j2000_z

rot_vel_j2000_z

1017

8

rot_vel_target_x

rot_vel_target_x

1025

8

rot_vel_target_y

rot_vel_target_y

1033

8

rot_vel_target_z

rot_vel_target_z

1041

8

norm_cnt_rl

norm_cnt_rl

1049

4

norm_cnt_nd

norm_cnt_nd

1053

4

norm_cnt_radio

norm_cnt_radio

1057

4

science_qual_flag

science_qual_flag

1061

4

system_gain

system_gain

1065

4

antenna_temp

antenna_temp

1069

4

receiver_temp

receiver_temp

1073

4

ant_temp_std

ant_temp_std

1077

4

pass_geom_time_offset

pass_geom_time_offset

1081

4

pass_pol_angle

pass_pol_angle

1085

4

pass_emission_angle

pass_emission_angle

1089

4

pass_azimuth_angle

pass_azimuth_angle

1093

4

pass_centroid_lon

pass_centroid_lon

1097

4

pass_centroid_lat

pass_centroid_lat

1101

4

pass_major_width

pass_major_width

1105

4

pass_minor_width

pass_minor_width

1109

4

pass_ellipse_pt1_lon

pass_ellipse_pt1_lon

1113

4

pass_ellipse_pt2_lon

pass_ellipse_pt2_lon

1117

4

pass_ellipse_pt3_lon

pass_ellipse_pt3_lon

1121

4

pass_ellipse_pt4_lon

pass_ellipse_pt4_lon

1125

4

pass_ellipse_pt1_lat

pass_ellipse_pt1_lat

1129

4

pass_ellipse_pt2_lat

pass_ellipse_pt2_lat

1133

4

pass_ellipse_pt3_lat

pass_ellipse_pt3_lat

1137

4

pass_ellipse_pt4_lat

pass_ellipse_pt4_lat

1141

4

num_pulses_received

num_pulses_received

1145

4

total_echo_energy

total_echo_energy

1149

4

noise_echo_energy

noise_echo_energy

1153

4

x_factor

x_factor

1157

4

sigma0_uncorrected

sigma0

1161

4

sigma0_corrected

sigma0_corrected

1165

4

sigma0_uncorrected_std

sigma0_uncorrected_std

1169

4

height_above_surface

height_above_surface

1173

4

has_std

has_std

1177

4

act_geom_time_offset

act_geom_time_offset

1181

4

act_pol_angle

act_pol_angle

1185

4

act_incidence_angle

act_incidence_angle

1189

4

act_azimuth_angle

act_azimuth_angle

1193

4

act_centroid_lon

act_centroid_lon

1197

4

act_centroid_lat

act_centroid_lat

1201

4

act_major_width

act_major_width

1205

4

act_minor_width

act_minor_width

1209

4

act_ellipse_pt1_lon

act_ellipse_pt1_lon

1213

4

act_ellipse_pt2_lon

act_ellipse_pt2_lon

1217

4

act_ellipse_pt3_lon

act_ellipse_pt3_lon

1221

4

act_ellipse_pt4_lon

act_ellipse_pt4_lon

1225

4

act_ellipse_pt1_lat

act_ellipse_pt1_lat

1229

4

act_ellipse_pt2_lat

act_ellipse_pt2_lat

1233

4

act_ellipse_pt3_lat

act_ellipse_pt3_lat

1237

4

act_ellipse_pt4_lat

act_ellipse_pt4_lat

1241

4

altimeter_profile_range_start

altimeter_profile_range_start

1245

4

altimeter_profile_range_step

altimeter_profile_range_step

1249

4

altimeter_profile_length

altimeter_profile_length

1253

4

sar_azimuth_res

sar_azimuth_res

1257

4

sar_range_res

sar_range_res

1261

4

sar_centroid_bidr_lon

sar_centroid_bidr_lon

1265

4

sar_centroid_bidr_lat

sar_centroid_bidr_lat

1269

4

 

  1. List of SBDR Field Descriptions
  2. Engineering Data Segment Fields

sync

Constant hexadecimal value used for binary format checking.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 77746B6A hexadecimal
maximum_value: 77746B6A hexadecimal

spacecraft_clock (sclk)

Reference spacecraft clock count for each burst. The LSB is nearly 1 second but not exactly. For exact time references use t_ephem_time

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: 1 spacecraft clock count
minimum_value: 0
maximum_value: 232 -1

burst_id

An identifier for each burst which is unique for the course of the mission.

Consecutive bursts within a data take have consecutive record_id values.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 232 -1

cds_pickup_rate (scpr)

CDS pickup rate.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: bits/s
valid_values: 364800, or 30400

 

burst_start_time (brst)

Burst start time expressed as an offset from the reference spacecraft clock count.

The precise spacecraft time at the start of the burst is sclk + brst in seconds.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.0

maximum_value: 1.0

 

header_tfi

Specified execute time of test and control instruction expressed as time after IEB trigger, bits 0-15 of Test and Control IEB instruction.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0
maximum_value: 65535 (18.2 hours)

header_tnc

Test and control mode, bits 24-31 of Test and Control IEB.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

header_typ

Instruction type (test and control), bits 22-23 of Test and Control IEB.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible value: 1

header_tca

Test and Control Parameter A, bits32-47 of Test and Control IEB

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

header_tcb

Test and Control Parameter B, bits 48-63 of Test and Control IEB

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

header_tcc

Test and Control Parameter C, bits 64-79 of Test and Control IEB

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

pwri

Most recent power instruction.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 232 -1

vicc

Valid/invalid spacecraft command count (least significant 16 bits). Bit 0 (MSB) 0=valid, 1=invalid. Bits 1-15 represent command counter.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

vimc

Valid/invalid spacecraft message count (least significant 16 bits). Bit 0 (MSB) 0=valid, 1=invalid. Bits 1-15 represent message counter.

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

tail_len

Word (16-bit) count of SAR/ Altimeter Block (SAB) tail.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible values: 0 (no tail), 32, 16384

tail_id

Running count of non-zero length SAB tails.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

sab_counter

Running count of SABs.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

sab_len

Word (16-bit) count of SAB data field.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

fswm

Flight software error module ID.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

fswc

Flight software error code.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

ctbc

Count down for bursts in instruction.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

rx_window_pri (ctrx)

Current receive window size.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: PRI
minimum_value: 0
maximum_value: 255

ctps

This field is 11 bits read from the 16 bit DCREG register in the CTU: the format of this field is:

L, P/SLKD, P/SLKD, HPALKD, HPALKD, C, B, A, C, B, A

(L = DCREG[15] = DCREG MSB = CTPS MSB)

In terms of DCREG bits the CTPS format is: DCREG[15, 14, 13, 10, 9, 8, 7, 6, 5, 4, 3]

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 2047

ctbe

Current beam number in unitary code, e.g. 100002 = beam 5 enabled.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible values: 100002, 010002, 001002, 000102, 000012

ctps_ctbe

Original telemetry 16 bit encoding of CTPS (Most significant 11 bits)

and CTBE (least significant 5 bits) stored as a 32 bit integer.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 64094

header_end

Instruction read back disagree (IRBD) which consists of 17 single bit flags at the end of a SAB header.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 217 - 1

slow_tfi

Time from IEB trigger for slow field instruction.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0
maximum_value: 65535 (18.2 hours)

data_take_number (dtn)

Data take number.

Definition: 000000002 = the first IEB Sequence Table uploaded after launch.

The MOS will increment this parameter by one for every new IEB Sequence Table that is uploaded. This value will "roll over" from 255 to 0 if necessary.

Typical events that will cause the generation and uploading of a new IEB Sequence Table include:

Normal Radar SAR or ALT operation at Titan

Calibration not associated with normal operation (e.g. period Cruise Phase calibration)

Icy satellite measurements, imaging

"Target-of-opportunity" measurements, imaging

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 256

slow_typ

Slow field instruction type (3).

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
possible value: 3

calibration_source (csr)

Calibration source.

The following bit patterns are assigned to the various Calibration Sources:
(the three or four character mode name is in parenthesis)

00002 = Normal Operation. (norm)

00012 = Antenna being used as the Calibration Source. (ant)

00102 = Noise Diode being used as the Calibration Source. (diod)

00112 = Resistive Load being used as the Calibration Source. (load)

01002 = Rerouted Chirp being used as the Calibration Source. (chrp)

01012 = Leakage Signal being used as the Calibration Source. (leak)

01102 = Radiometer Only Calibration Mode. (rado)

01112 = Transmit Only Calibration Mode. (xmto)
10002 = Auto-Gain Control. (agc)

10012 - 11112 = (reserved by the CTU)

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 15

radar_mode (r_mode)

This field represents the radar mode, and is defined as follows:
(the four character mode name is in parenthesis)

00002 = ALTL: Altimeter, Low-Resolution (altl)

00012 = ALTH: Altimeter, High-Resolution (alth)

00102 = SARL: Synthetic Aperture Radar, Low-Resolution (sarl)

00112 = SARH: Synthetic Aperture Radar, High-Resolution (sarh)

01002 = Radiometer Only (rado)

01012 = Inter-Galactic Object (IGO) Calibration (igoc)

01102 = Earth Viewing Calibration (evca)

01112 = Bi-Static Operation (bsop)

10002 = ALTL with Auto Gain (alag)

10012 = ALTH with Auto Gain (ahag)

10102 = SARL with Auto Gain (slag)

10112 = SARH with Auto Gain (shag)

11002-11112 = (spare)

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 15

sin

Slow field instruction number. The MOS will reset this parameter to zero (000000002) for every Data Take, and will increment this parameter by one for every slow field instruction. This value will "roll over" from 255 to 0 if necessary.

PDS_Object: Column of Table

conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

bem

Beam mask.

The following bit patterns describe the possible Beam Masks used by the Cassini RADAR DSS:

000002 = All beams disabled (Used during internal source Calibration modes such as
noise diode, resistive load and rerouted chirp).

000012 = Beam #1 Only enabled.

000102 = Beam #2 Only enabled.

000112 = Beams #2 and #1 enabled.

·
·
·

100002 = Beam #5 Only enabled.

·

·

·

110102 = Beams #5, #4 and #2 enabled.

·

·

·

111112 = All Five Beams enabled.

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 31

baq_mode

BAQ compression mode.

The following bit patterns are assigned to the various BAQ Modes:

0002 = 8-to-2 bit Block Adaptive Quantization (normally used SAR mode)

0012 = 8-to-1 bit Block Adaptive Quantization
(i.e. sign bit and thresholds, only)

0102 = 8 bit to 0 (no active mode data)

0112 = 8 bit to 2 MSB's

1002 = 8 bit to 4 MSB's

1012 = 8 bits straight (normally used Calibration mode)

1102 = 8-to-4 bit Block Adaptive Quantization (normally used Low Res ALT mode)

1112 = 8-to-4 bit Block Adaptive Quantization (normally used Hi Res ALT mode)

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 7

tro

Transmit Burst/Receive Window Offset.

The Transmit Burst/Receive Window Offset is the difference between the length of the Transmit Burst and the length of the Receive Window.

 

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: s
minimum_value: -8 PRI
maximum_value: +7 PRI

receiver_bandwidth (rc_bw)

Receiver bandwidth.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: Hz
possible values: 117 kHz, 468 kHz, 935 kHz, 4.675 MHz

adc_rate (adc)

ADC sample rate.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: Hz
possible values: 250 kHz, 1.0 MHz, 2.0 MHz, 10.0 MHz

at1_tot

Total receiver attenuation beams 1 and 2. This value is calibrated using pre-launch test data and is not identical to the nominal value encoded by at1_each.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none (not dB)
minimum_value: 1
maximum_value: 2.512 x 107

at3 _tot

Total receiver attenuation beam 3. This value is calibrated using pre-launch test data and is not identical to the nominal value encoded by at3_each.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none (not dB)
minimum_value: 1

maximum_value: 2.512 x 107

 

at4 _tot

Total receiver attenuation beam 4 and 5. This value is calibrated using pre-launch test data and is not identical to the nominal value encoded by at4_each.

 

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none (not dB)
minimum_value: 1
maximum_value: 2.512 x 107

at1_each

This parameter describes the attenuation for the Microwave Receiver (MR) in the RFES when either Antenna Beam #1 or #2 are selected. The least significant twelve bits actually report three separate attenuators in the RFES MR.

 

From MSB to LSB:

Bits [11,...,07] report the commanded attenuation (0dB - 31dB) of attenuator #1 (resolution of 1 dB). Bits [06,...,02] report the commanded attenuation (0dB - 31dB) of attenuator #2 (resolution of 1 dB). Bits [01,00] report the commanded attenuation (0dB - 12dB) of attenuator #3 (resolution of 4 dB). The total nominal attenuation is

the sum of the three attenuator settings (in dB).

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

at3_each

This parameter describes the attenuation for the Microwave Receiver (MR) in the RFES when Antenna Beam #3 is selected. The least significant twelve bits actually report three separate attenuators in the RFES MR.

 

From MSB to LSB:

Bits [11,...,07] report the commanded attenuation (0dB - 31dB) of attenuator #1 (resolution of 1 dB). Bits [06,...,02] report the commanded attenuation (0dB - 31dB) of attenuator #2 (resolution of 1 dB). Bits [01,00] report the commanded attenuation (0dB - 12dB) of attenuator #3 (resolution of 4 dB). The total nominal attenuation is

the sum of the three attenuator settings (in dB).

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

at4_each

This parameter describes the attenuation for the Microwave Receiver (MR) in the RFES when either Antenna Beam #4 or #5 are selected. The least significant twelve bits actually report three separate attenuators in the RFES MR.

 

From MSB to LSB:

Bits [11,...,07] report the commanded attenuation (0dB - 31dB) of attenuator #1 (resolution of 1 dB). Bits [06,...,02] report the commanded attenuation (0dB - 31dB) of attenuator #2 (resolution of 1 dB). Bits [01,00] report the commanded attenuation (0dB - 12dB) of attenuator #3 (resolution of 4 dB). The total nominal attenuation is

the sum of the three attenuator settings (in dB).

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

antenna_int_period (rip)

Radiometer integration period. This parameter is the length of time during

which passive signal energy received by the antenna is measured during each

radiometer measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.010 s
maximum_value: 0.075 s

chirp_time_step (csd)

Chirp step duration, the duration in time of each single frequency step.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
possible_values: should always be 666.7 ns.

num_rad_meas (rad)

Radiometer window counts. The number of times within a "burst" that radiometer measurements occur.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 1
maximum_value: 255

num_chirp_steps (csq)

Chirp step quantity, number of frequency changes used to perform a chirp.

(For example, a chirp estimated by two discrete frequencies exhibits one

frequency change, hence csq=1.)

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 216
maximum_value: 749

chirp_length

Total length of a chirped signal in time, i.e. csd(csq+1).

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.144 ms
maximum_value: 0.5 ms

chirp_freq_step (slow_cfs)

Chirp frequency step size.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: Hz
minimum_value: 0 Hz
maximum_value: 117.2 kHz

fast_tfi

Time from IEB trigger for fast field instruction.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0
maximum_value: 65535 (18.2 hours)

 

fin

Fast field instruction number. The MOS will reset this parameter to zero (000000002) for every Data Take, and will increment this parameter by one for every fast field Instruction. This value will "roll over" from 255 to 0 if necessary.

PDS_Object: Column of Table

conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

 

fast_typ

Instruction type (fast field=2)

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible_value: 2

 

num_pulses (pul)

Number of pulses per burst.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

bii

Bursts in instruction.

Bursts in Instruction represents to total number of Bursts (i.e., Burst Periods) to be generated per Fast Field Instruction.

Hardware in the DSS maintains a count of the number of Bursts generated for each Fast Field Instruction, and when the appropriate number of complete Burst Periods has elapsed, that hardware generate an interrupt to the Flight Computer, and stops generating Bursts.

If Bursts in Instruction is zero, the DSS is in the so-called "Perpetual Instruction" mode. In this mode, the Digital Subsystem generates waveforms based on a given Fast/Slow instruction pair for an indefinite amount of time (i.e., it will not be limited by the upper range of the bii parameter).

 

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 255

burst_period (bpd)

Burst period. The Burst Period is the total time interval allocated for the transmission of pulses, the receipt of echoes, and the taking of Radiometry data.

 

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 10 ms
maximum_value: 4.095 s

pri

Pulse repetition interval. This parameter is the time interval between successive transmitted (chirped) pulses.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.002 ms
maximum_value: 4.092 ms

rx_window_delay (rwd)

The Receive Window Delay (as defined in the DSS) is measured from the beginning of the first pulse in the first PRI that makes up the Transmit Burst. It includes the PRIs that make up the Transmit Burst and the PRIs between the end of Transmit Burst and the beginning of the Receive Window. The Receive Window Delay will always be an integer number of PRIs.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0
maximum_value: 1023 PRI

chirp_start_freq (fast_csf)

Chirp start frequency is defined as the frequency of the first frequency step that forms the chirp.

 

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: Hz
minimum_value: 0 Hz
maximum_value: 30 MHz

iebtth

Most significant 16 bits of the IEB trigger time or the ILX execution time.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

iebttl

Least significant 16 bits of the IEB trigger time or the ILX execution time.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

bgcalls

Number of calls to the background task during one ETA interrupt period.

(Flight S/W only)

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 65535

delvmn

BSL or CROC-FSW delivery date: month.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: month
minimum_value: 1
maximum_value: 12

delvda

BSL or CROC-FSW delivery date: day.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: day of month
minimum_value: 1
maximum_value: 31

delvyr

BSL or CROC-FSW delivery date: year

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: year
minimum_value: 1990
maximum_value: 2010

raw_res_load_meas (cnt_rl)

Raw counts for resistive load measurement.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

raw_antenna_meas (cnt_radio)

Raw counts for antenna (radiometer) measurement summed

over all measurement windows.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 220 -1

raw_noise_diode_meas (cnt_nd)

Raw counts for noise diode measurement.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

 

 

eout

3 LSB's of Engineering Flight Computer Output Discretes. These discrete bits are: OUT*2, OUT*1 and OUT*0; they correspond to SWD*, TIS* and RMC* in the SDB. See Cassini RADAR DSS High Level Design document Section 4.6.1 for more information.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 7

subr

SubCom row number for this burst. Indicates which elements of engineering telemetry were most recently updated. See Cassini RADAR DSS High Level Design document Section 7.3 for more information.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 15

space_craft_time

Twelve Least significant bits of spacecraft clock logged when the Engineering data in this SubCom data set was acquired.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
minimum_value: 0
maximum_value: 4095

noise_diode_int_period (hip)

Integration time of noise diode measurement.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.0
maximum_value: 0.02

res_load_int_period (cip)

Integration time of resistive load measurement.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: s
minimum_value: 0.0
maximum_value: 0.08

fwdtmp

Forward diode temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

be1tmp

Beam 1 temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

be2tmp

Beam 2 temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

be3tmp

Beam 3 temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

be4tmp

Beam 4 temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

be5tmp

Beam 5 temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

diptmp

Diplexer temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

rlotmp

Resistive load temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

tadcal1

Thermistor calibration temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

nsdtmp

Noise diode temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

lnatmp

Low noise amplifier temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

evdtmp

Envelope detector temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

mratmp

Microwave receiver temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

mruttm

Microwave receiver unit base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

dcgttm

Digital chirp generator base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

cucttm

Chirp up converter and amplifier base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

twttmp

Traveling Wave Tube (TWT) temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

epctmp

Electronic power converter (EPC) temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

tw1ttm

TWT base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

ep1ttm

EPC base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

p_stmp

Power supply temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

p_sttm

Power supply base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

fguttm

Frequency generator unit base plate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

tadcal4

Thermistor calibration temperature 2.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

esstmp

Energy storage subsystem heat sink temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

wgb1t1

Beam 1 lower waveguide temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

wgb3t1

Beam 3 lower wave guide temperature 1.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

wgb3t2

Beam 3 lower wave guide temperature 2.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

wgb3t3

Beam 3 lower waveguide temperature 3.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

wgb5t1

Beam 5 lower waveguide temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

pcutmp

Power converter unit temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

adctmp

Radiometer analog to digital converter temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

tadcal2

Thermistor extended range calibration temperature #1.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

ecltmp

Emitter coupled logic portion temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

cputmp

Engineering flight computer CPU board temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

memtmp

Engineering flight computer memory board temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

sadctmp

Science analog to digital converter temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

tadcal3

Thermistor extended range calibration temperature #2.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

frwdpw

Forward power telemetry.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: W

 

dcgmon

Chirp envelope monitoring point. An envelope reflecting the presence of a DCG output signal is developed by the Digital CHIRP Generator. In effect, this envelope represents each burst of transmission by the RADAR. It will have an amplitude of 2 to 5 volts and widths of 500 microseconds to 75 milliseconds. The envelope is differentially received, peak detected, and then sequentially sampled by the Analog signal Multiplexer. A drooping peak detector level without regenerative resurgence is indicative of delayed or missing envelopes.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none

minimum_value: 100
maximum_value: 4000

lpltlm

The low power level telemetry signal is generated in the RFES. It is the envelope of the transmitted burst out of the CUCA. This envelope has an amplitude of 4 to 5 volts and widths of 500 microseconds to 75 milliseconds. It is differentially received, peak detected, and then sequentially sampled by the Analog Signal Multiplexer. This peak detected output will also produce a decaying level between transmission envelopes, with a resurgence to maximum initiated by each envelope. Each resurgence serving to confirm a transmission. Missing envelopes will identify with a decayed peak detector level.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: W?

nsdcur

Noise diode current.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: A

hpapsm

High power amplifier Ku-band transmitter current

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: A

catcur

TWT cathode current

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

p_smon

Power supply current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

svlsta

Secondary line voltage status.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

usotmp

Ultra-stable oscillator temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

cpbnkv

Capacitor bank voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

essvlt

Energy storage subsystem output voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

tadcal5

Conditioned voltage calibration #1.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu5v_pos

Power converter unit +5 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu5i_pos

Power converter unit +5 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcu5v_neg

Power converter unit -5 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu5i_neg

Power converter unit -5 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcu15v_pos

Power converter unit +15 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu15i_pos

Power converter unit +15 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcu15v_neg

Power converter unit -15 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu15i_neg

Power converter unit -15 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcu12v_neg

Power converter unit -12 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu12i_neg

Power converter unit -12 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcucur

Power converter unit 30 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pllmon

Phase locked loop 20 Mhz frequency.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: Hz

ctu5i

Control and timing unit +5 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

tadcal6

TADC Mux calibration.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: none

pcu9v_pos

Power converter unit +9 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu9i_pos

Power converter unit +9 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: A

 

pcu9v_neg

Power converter unit -9 V voltage.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

pcu9i_neg

Power converter unit -9 V current.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

tadcal7

Conditioned voltage calibration #2.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: V

 

shpttm

Inboard shearplate temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

 

num_bursts_in_flight

Number of transmitted bursts simultaneously in flight. This number is usually 1. The only exceptions are distant scatterometer measurements. For values greater than one the returned echo data from a transmitted burst is not stored in the same record with the radar instrument parameters used to command that burst.

For example, consider the case in which num_bursts_in_flight =2 in record #2 of the file. All of the engineering data segment fields in record #2 refer to the burst transmitted in measurement cycle #2, except num_raw_active_mode_data and rms_raw_active_mode_data which correspond to data received in measurement cycle #2 but transmitted in a previous cycle. The intermediate level data segment field definitions are unaffected by the value of num_bursts_in_flight. The science data segment fields correspond to data collected in measurement cycle #2. The active mode science data fields would (if valid) correspond to a burst transmitted in a previous cycle. (In practise, active mode science data fields will not be valid for num_bursts_in_flight> 1, because distant scatterometry does not have a high enough SNR to compute a measurement for each individual burst. ) In the LBDR file, the active mode data array contains data collected in measurement cycle #2, but transmitted in a previous measurement cycle.

 

To obtain the active mode data for the burst transmitted in measurement cycle #2 one needs to look ahead num_bursts_in_flight-1 records. For our example (num_bursts_in_flight =2) the received echo data is in measurement cycle #3.

 

The active mode measurement geometry is always defined for a point in time midway between the centers of the transmit and receive windows in a single measurement cycle. This results in a temporal bias when num_bursts_in_flight> 1.

 

PDS_Object: Column of Table
conceptual_type: integer

storage_type: int32
number_of_bytes: 4
units: none

 

raw_active_mode_length

Number of valid entries in the time sampled echo data array.

PDS_Object: Column of Table
conceptual_type: integer

storage_type: int32
number_of_bytes: 4
units: none

maximum value: 32000

minimum value: 0

 

raw_active_mode_rms

Root mean square of valid echo data array entries.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none

 

  1. Intermediate Level Data Segment Fields

engineer_qual_flag

Flag to indicate quality of intermediate level data segment. Bit 0 is the LSB. The following table indicates the meaning of setting each bit to 1.

 

Bit 0 Bad or missing s/c attitude data

Bit 1 Other bad of missing geometry data

Bit 2 Missing temperature telemetry (scwg_tmp)

Bit 3 Missing temperature telemetry (feed_tmp)

Bit 4 Missing temperature telemetry (hga_tmp)

Bit 5 Downlink error in raw data file

 

The other 26 bits are not currently used but are available for future use.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible values: 0,1,2,255

t_sc_sclk

Encoded spacecraft clock time. This value is used by the SPICE software employed by the Cassini Navigation Team.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: N/A

t_et

Ephemeris time in seconds since J2000.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: s

t_utc_ymd

UTC time in yyyy-mm-ddThh:mm:ss.sss format. One space character is

padded at the end to ensure file size is a multiple of 4 bytes.

PDS_Object: Column of Table
conceptual_type: text
storage_type: ASCII string
number_of_bytes: 24
units: none

t_utc_doy

UTC time in yyyy-doyThh:mm:ss.sss format. Three space characters are

padded at the end to ensure file size is a multiple of 4 bytes.

PDS_Object: Column of Table
conceptual_type: text
storage_type: ASCII string
number_of_bytes: 24
units: none

transmit_time_offset

Time offset in seconds from t_ephem_time at which the leading edge of the first transmit pulse leaves the antenna.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: s

 

time_from_closest_approach

t_ephem_time - closest_approach_time. The closest approach time is estimated by the ground processor and included in the value of the DESCRIPTION keyword in the PDS label (header) in UTC format to the nearest ms.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: s

time_from_epoch

t_ephem_time - epoch_time. The value of epoch_time is usually the same as the closest approach time but may differ occasionally for logistic reasons.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: s

 

target_name

Name of body observed during this burst. Space characters are

padded at the end to ensure the string is 16 bytes long.

PDS_Object: Column of Table
conceptual_type: text
storage_type: ASCII string
number_of_bytes: 16
units: none

tbf_frame_name

Name of target body fixed frame in the NAIF SPICE system

(i.e., "IAU_TITAN"). Space characters are

padded at the end to ensure the string is 24 bytes long.

 

PDS_Object: Column of Table
conceptual_type: text
storage_type: ASCII string
number_of_bytes: 24
units: none

pole_right_ascension

Right ascension (east positive longitude in the target centered J2000 celestial sphere) of the North pole of the target body in degrees at the epoch time.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: degrees

pole_declination

Declination (latitude in the target centered J2000 celestial sphere) of the North pole of the target body in degrees at the epoch time.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: degrees

target_rotation_rate

The rotation about the north pole of the target body required to complete the transformation from J2000 to target body fixed coordinates.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: degrees/s

target_rotation_angle

The rotation about the north pole of the target body required to complete the transformation from J2000 to target body fixed coordinates.

Target body fixed coordinates at epoch_time can be computedby successively applying the following three rotations to the J2000 coordinates: pole_right_ascension degrees about the J2000 Z-axis, 90 - pole_declination degrees about the once-rotated Y-axis, and target_rotation_angle degrees about the twice rotated Z-axis.

An addional rotation of target_rotation_rate * time_from_epoch degrees about the thrice rotated Z-axis yields the target body fixed coordinates at t_ephem_time.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8
units: degrees

 

scwg_tmp

Ku-band waveguide 3 temperature 9

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

feed_tmp

X, Ka, Ku-band feed temperature 5

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

hga_tmp

High gain antenna reflector rear temperature 1

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: K

 

beam_number

Number of the current beam.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none
possible values: 1,2,3,4,5

 

sc_pos_j2000_x

X component of the spacecraft position vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_pos_j2000_y

Y component of the spacecraft position vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_pos_j2000_z

Z component of the spacecraft position vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_vel_j2000_x

X component of the spacecraft velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_vel_j2000_y

Y component of the spacecraft velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_vel_j2000_z

Z component of the spacecraft velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_pos_target_x

X component of the spacecraft position vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_pos_target_y

Y component of the spacecraft position vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_pos_target_z

Z component of the spacecraft position vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km

 

sc_vel_target_x

X component of the spacecraft velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_vel_target_y

Y component of the spacecraft velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_vel_target_z

Z component of the spacecraft velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: km/s

 

sc_x_axis_j2000_x

X component of the unit vector in the J2000 frame parallel to the X axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_x_axis_j2000_y

Y component of the unit vector in the J2000 frame parallel to the X axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_x_axis_j2000_z

Z component of the unit vector in the J2000 frame parallel to the X axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_j2000_x

X component of the unit vector in the J2000 frame parallel to the Y axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_j2000_y

Y component of the unit vector in the J2000 frame parallel to the Y axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_j2000_z

Z component of the unit vector in the J2000 frame parallel to the Y axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_j2000_x

X component of the unit vector in the J2000 frame parallel to the Z axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_j2000_y

Y component of the unit vector in the J2000 frame parallel to the Z axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_j2000_z

Z component of the unit vector in the J2000 frame parallel to the Z axis of the spacecraft coordinate system.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_x_axis_target_x

X component of the unit vector in the target body frame parallel to the X axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_x_axis_target_y

Y component of the unit vector in the target body frame parallel to the X axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_x_axis_target_z

Z component of the unit vector in the target body frame parallel to the X axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_target_x

X component of the unit vector in the target body frame parallel to the Y axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_target_y

Y component of the unit vector in the target body frame parallel to the Y axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

 

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_y_axis_target_z

Z component of the unit vector in the target body frame parallel to the Y axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_target_x

X component of the unit vector in the target body frame parallel to the Z axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_target_y

Y component of the unit vector in the target body frame parallel to the Z axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

sc_z_axis_target_z

Z component of the unit vector in the target body frame parallel to the Z axis of the spacecraft coordinate system. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real

storage_type: float64
number_of_bytes: 8

units: none
minimum_value: -1
maximum_value: 1

rot_vel_j2000_x

X component of the spacecraft angular velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

rot_vel_j2000_y

Y component of the spacecraft angular velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

rot_vel_j2000_z

Z component of the spacecraft angular velocity vector in the J2000 frame.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

rot_vel_target_x

X component of the spacecraft angular velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

rot_vel_target_y

Y component of the spacecraft angular velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

rot_vel_target_z

Z component of the spacecraft angular velocity vector in the target body frame. Value is zero if target name is `NONE' or `CALIBRATION.'

PDS_Object: Column of Table
conceptual_type: real
storage_type: float64
number_of_bytes: 8
units: rad/s

norm_cnt_rl

Normalized radiometer resistive load measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: counts/s
minimum_value: 0
maximum_value: N/A

norm_cnt_nd

Normalized radiometer noise diode measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: counts/s
minimum_value: 0
maximum_value: N/A

norm_cnt_radio

Normalized radiometer antenna measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: counts/s
minimum_value: 0
maximum_value: N/A

 

  1. Science Data Segment Fields

science_qual_flag

Quality flag specifying which of the science data elements are valid. Zero value indicates all data fields are valid. The meaning of a set bit (bit =1) is as follows for each bit. (Bit 0 is the LSB).

 

Bit 0 All passive mode fields are invalid.

Bit 1 All active mode fields are invalid.

Bit 2 All altimeter fields are invalid.

Bit 3 All scatterometer fields are invalid.

Bit 4 All radiometer fields are invalid.

Bit 5 Passive boresight is not on surface.

Bit 6 One or more of passive ellipse points is not on surface.

Bit 7 Active boresight is not on surface.

Bit 8 One or more of active ellipse points is not on surface.

 

PDS_Object: Column of Table
conceptual_type: integer

storage_type: int32
number_of_bytes: 4
units: none

 

 

system_gain

Coefficient used to convert radiometer counts to antenna brightness temperature.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: dB

antenna_temp

Antenna contribution to overall system temperature.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: K

 

receiver_temp

Internally generated receiver noise contribution to overall system temperature.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: K

 

 

ant_temp_std

Estimated standard deviation of the residual error in antenna temperature estimate.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: K

pass_geom_time_offset

Time offset from t_ephem_time for which passive geometry fields are computed. This time is defined to be the mid-point of the summed radiometer windows.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s

pass_pol_angle

Angle of orientation of the electric field vector about the look vector during receipt of the passive mode measurement. Angle is zero when the electric field vector is perpendicular to the plane of incidence as defined by the look vector and the target surface normal, and increases counterclockwise.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: deg

pass_emission_angle

The angle between the antenna look direction and the surface normal during receipt of the passive mode measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units deg

pass_azimuth_angle

The direction of the projection of the antenna look vector in the plane tangent to the surface at the measurement centroid, expressed by the angle counterclockwise from East (e.g. North is 90 degrees).

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units deg

 

pass_centroid_lon

Longitude of the passive (one-way) antenna boresight.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

pass_centroid_lat

Latitude of the passive (one-way) antenna boresight.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

 

pass_major_width

Width of major axis of passive best fit ellipse, the distance along the map projection reference sphere between point 1 and point 2.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

pass_minor_width

Width of minor axis of passive best fit ellipse, the distance along the map projection reference sphere between point 3 and point 4.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

pass_ellipse_pt1_lon

Longitude of first point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse. Each point on the best fit ellipse is computed in the plane tangent to the surface at the boresight and then extended to the reference surface along the line of site of the antenna.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

pass_ellipse_pt2_lon

Longitude of second point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

pass_ellipse_pt3_lon

Longitude of third point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

PDS_Object: Column of Table

conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

pass_ellipse_pt4_lon

Longitude of fourth point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

pass_ellipse_pt1_lat

Latitude of first point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

pass_ellipse_pt2_lat

Latitude of second point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

pass_ellipse_pt3_lat

Latitude of third point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

PDS_Object: Column of Table

conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

pass_ellipse_pt4_lat

Latitude of fourth point in ellipse representing passive measurement one-way 3-dB gain pattern contour. This point is on the minor axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

num_pulses_received

Number of pulses which were received completely within the echo window. Partial pulses are ignored.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4
units: none

total_echo_energy

Estimate of the total energy in the receiver window in Joules.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: J

 

noise_echo_energy

Estimate of the noise contribution to the energy in the receiver window.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: J

x_factor

Ratio of received signal energy to normalized backscatter cross-section.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: J

 

sigma0_uncorrected (sigma0)

Normalized backscatter cross-section. Quantity is unitless. Scale is physical (linear) not dB (logarithmic).

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none

 

sigma0_corrected

Normalized backscatter cross-section corrected to minimize dependence on incidence angle. Quantity is unitless. Scale is physical (linear) not dB (logarithmic).

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none

sigma0_uncorrected_std

Estimated standard deviation of residual error in normalized backscatter cross-section.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: none

height_above_surface

Estimated height above the reference surface. For Titan the reference surface is a sphere. The quantity is computed by subtracting the range to target from the spacecraft altitude. Computed from the active mode data when the radar is in altimeter mode. For other radar modes this data field is invalid, as indicated by science_qual_flag. This field will initially be a place holder only until an altimeter processor has been developed.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: km

 

has_std

Estimated standard deviation of the residual error in the height_above_surface measurement.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32

number_of_bytes: 4
units: km

 

act_geom_time_offset

Time offset from t_ephem_time for which active geometry fields are computed. This time is defined to be the midway between the center of the transmit window and the center of the receive window.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: s

act_pol_angle

Angle of orientation of the electric field vector about the look vector during the active mode measurement. Angle is zero when the electric field vector is perpendicular to the plane of incidence as defined by the look vector and the target surface normal, and increases counterclockwise. Angle is determined for a time halfway between transmission and receipt of the active mode signal.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4
units: deg

 

act_incidence_angle

The angle between the antenna look direction and the surface normal halfway between transmission and receipt of the active mode signal.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units deg

act_azimuth_angle

The direction of the projection of the antenna look vector in the plane tangent to the surface at the measurement centroid expressed by the angle counterclockwise from East (e.g. North is 90 degrees).

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units deg

act_centroid_lon

Longitude of the active (two-way) antenna boresight.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

act_centroid_lat

Latitude of the active (two-way) antenna boresight.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

 

act_major_width

Width of major axis ofactive best fit ellipse, the distance along the map projection reference sphere between point 1 and point 2.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

act_minor_width

Width of minor axis of active best fit ellipse, the distance along the map projection reference sphere between point 3 and point 4.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

 

act_ellipse_pt1_lon

Longitude of first point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

act_ellipse_pt2_lon

Longitude of second point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

act_ellipse_pt3_lon

Longitude of third point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-minor axis of the best fit ellipse.

PDS_Object: Column of Table

conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

act_ellipse_pt4_lon

Longitude of fourth point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-minor axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

act_ellipse_pt1_lat

Latitude of first point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

act_ellipse_pt2_lat

Latitude of second point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-major axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

act_ellipse_pt3_lat

Latitude of third point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-minor axis of the best fit ellipse.

PDS_Object: Column of Table

conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

act_ellipse_pt4_lat

Latitude of fourth point in ellipse representing active measurement two-way 3-dB gain pattern contour. This point is on the semi-minor axis of the best fit ellipse.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4

units: deg

 

altimeter_profile_range_start

Range of the first altimeter profile value in each pulse.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units km

 

altimeter_profile_range_step

Difference in range between consecutive range bins in altimeter profile.

PDS_Object: Column of Table
conceptual_type: real
storage_type: float32
number_of_bytes: 4

units km

 

altimeter_profile_length

Number of valid entries in altimeter profile.

PDS_Object: Column of Table
conceptual_type: integer
storage_type: uint32
number_of_bytes: 4

units none
minimum value: 0

maximum value: 32000

 

sar_azimuth_res

Effective SAR image resolution along azimuth dimension. The value is the width on the ground of a nominal doppler bin (1bin width = 1/(pulse trainduration)) for the current burst multiplied by a constant factor which depends on filter parameters used during azimuth compression.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

sar_range_res

Effective SAR image resolution along range dimension. The value is the width on the ground of a nominal range bin (1bin width = speed of light/(chirp bandwidth)) for the current burst multiplied by a constant factor which depends on filter parameters used during range compression.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: km

 

 

sar_centroid_bidr_lon

Longitude of the active (two-way) antenna boresight in the BIDR oblique cylindrical map projection.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg

sar_centroid_bidr_lat

Latitude of the active (two-way) antenna boresight in the BIDR oblique cylindrical map projection.

PDS_Object: Column of Table
conceptual_type: real

storage_type: float32
number_of_bytes: 4
units: deg