PDS_VERSION_ID         = PDS3            
RECORD_TYPE            = STREAM                    
OBJECT                 = TEXT
  PUBLICATION_DATE     = 2009-09-14
  INTERCHANGE_FORMAT   = ASCII
  NOTE                 = "Readme file for Cassini ISS Cartographic Map 
                          Volumes DVDs"
END_OBJECT             = TEXT
END





CASSINI IMAGING SCIENCE SUBSYSTEM CARTOGRAPHIC MAP VOLUMES

  COISS_3005
  VOLUME 5: CASSINI ISS CARTOGRAPHIC MAP OF IAPETUS





AAREADME CONTENTS
-----------------
1. Introduction
2. DVD Format
3. DVD Contents
4. File Formats
5. Contact Information
6. Cognizant Persons & Acknowledgments





---------------------------------------------------------------------
1.  Introduction

Complementing the collection of raw Experiment Data Record (EDR) volumes and 
calibration volumes available from the Cassini Imaging Science Subsystem 
(ISS), this set of cartographic map products were generated by the ISS team 
members as an archivable second-order product.

The Cassini ISS consists of two framing cameras. The narrow angle camera is a 
reflecting telescope with a focal length of 2000 mm and a field of view of 
0.35 degrees. The wide angle camera is a refractor with a focal length of 
200 mm and a field of view of 3.5 degrees. Each camera is outfitted with a 
number of spectral filters which, taken together, span the electromagnetic 
spectrum from 0.2 to 1.1 micrometers. At the heart of each camera is a 
charged coupled device (CCD) detector consisting of a 1024 square array of 
pixels, each 12 microns on a side. The camera system allows many options for 
data collection,including choices for on-chip summing and data compression. 

The Saturnian system has 47 (and counting) satellites of different sizes. 
However, these Cassini ISS cartographic mapping volumes include only include 
the medium-sized icy satellites Mimas, Enceladus, Tethys, Dione, Rhea, 
Iapetus, and Phoebe.  

One of the objectives of the ISS team is to obtain global coverage for all 
medium-sized icy satellites with a resolution better than 1 km/pixel and 
obtain high-resolution images. This goal is being achieved with image 
sequences obtained during close flybys supplemented by images from greater 
distances to complete the coverage. Close flybys of all medium-sized 
satellites except Mimas are planned during the nominal mission of the Cassini 
spacecraft. Table I below shows the actual dates and flyby altitude:


   Satellite        Flyby Date     Flyby Altitude [km]
   ---------------------------------------------------
   Phoebe           2004 JUN 11      2070
   Iapetus          2004 DEC 31    123400
   Enceladus        2005 FEB 17      1260
   Enceladus        2005 MAR 09       500
   Enceladus        2005 JUL 14       170
   Mimas            2005 AUG 02     61150
   Tethys           2005 SEP 24      1500 
   Hyperion         2005 SEP 26       500
   Dione            2005 OCT 11       500
   Rhea             2005 NOV 26       500
   Iapetus          2007 SEP 10      1200  (planned)
   Enceladus        2008 MAR 12       100  (planned)

   Table I: Cassini flybys in 2004-2007


The cartographic maps were created from images taken by Cassini with a very 
small number of images from Voyager-1 and Voyager-2 used to fill in any gaps.
Only images taken with CL1, CL2, and GRN filters were used.  Images taken 
from all three missions are available online from the Planetary Data System 
(PDS) Imaging Node [http://pdsimaging.jpl.nasa.gov].

Imaging of the medium-sized icy satellites is ongoing and will continue until 
the end of the Cassini mission, making it possible to improve the image 
mosaics during the tour. 

The Cassini spacecraft will continue imaging throughout the tour mission. 
Satellite close flybys are scheduled for Tethys, Dione, Rhea, Iapetus, and 
Enceladus within the nominal tour mission ending in 2008. These data will be 
used to further improve the existing semi-controlled mosaics and maps and 
also to update or calculate initial global geodetic control networks of the 
Saturnian satellites for controlled orthophoto mosaics.

The following labeling conventions are found on these mapping volumes:

DATA_SET_ID              = "CO-S-ISSNA/ISSWA-5-MIDR-V1.0"
DATA_SET_NAME            = "CASSINI ORBITER SATURN ISSNA/ISSWA 5 MIDR
                           VERSION 1.0"
VOLUME_SERIES_NAME       = "MISSION TO SATURN"
VOLUME_SET_NAME          = "CASSINI ISS CARTOGRAPHIC MAP VOLUMES"
VOLUME_SET_ID            = USA_NASA_PDS_COISS_3XXX (where 3 = map and xxx = 
                           sequential numbering of the volumes)
VOLUMES                  = 7
VOLUME_FORMAT            = "UDF_ISO-9660_BRIDGE"
MEDIUM_TYPE              = "DVD-R"
MISSION_NAME             = "CASSINI-HUYGENS"
SPACECRAFT_NAME          = "CASSINI ORBITER"
STANDARD_DATA_PRODUCT_ID = ISS_MIDR 

The data contained within these mapping volumes is considered CODMAC 
Level 5 processed (as indicated in DATA_SET_NAME).  The definition for 
CODMAC Level 5 processing is described as: CODMAC Level 5 and NASA 
Level 2 - Geophysical parameters, generally derived from Level 1 data, 
and located in space and time commensurate with instrument location, 
pointing and sampling.  CODMAC Level 5 and NASA Level 3 -  Geophysical 
parameters mapped onto uniform space-time grids.




GETTING STARTED

To begin using the ISS cartographic map archive collection one should become 
familiar with the contents of the ROOT and DOCUMENT directories.  These 
directories include files that provide important detailed descriptive 
information on the ISS instrument and the archive files and formats.  For 
more information related specifically to the ISS EDR images, see the
documentation provided on the ISS EDR volumes archived with the PDS.  The 
files contained in the ROOT and DOCUMENT directories are found in various 
formats.  File formats are described below in section 4.

The 'data' directory contains the cartographic map sheets, the processed
tile images used to create the cartographic map sheets, and a simple 
cyclindrical global mosaic image.  See the file 'datainfo.txt' in the data 
directory for a description of the directory contents and naming conventions.

For a detailed description of the processing used in creating these maps, see
the file 'cartods.cat' in the catalog directory.

For a detailed description of the map projections used in creating these maps,
see the file 'dsmap.cat' in the catalog directory.

Finally, the PDS Discipline Nodes are chartered to assist users with using 
the datasets they curate. Contact them for assistance if you find you have 
questions on getting started with using the Cassini image archive.





---------------------------------------------------------------------
2.  DVD Format   

This DVD has been formatted so that a variety of computer systems
may access the data.  Specifically, it is formatted according to the 
ISO-9660 Level 2 Interchange Standard. For further information, refer 
to the ISO-9660 Standard Document: RF#ISO 9660-1988, April 15, 1988.

VOLUME_FORMAT          = UDF_ISO-9660_BRIDGE





---------------------------------------------------------------------
3.  DVD Contents

Files found on these ISS cartographic archive DVDs are organized into a 
series of subdirectories below the top-level directory.  

FILE                   CONTENTS
--------------------   ---------------------------
[ROOT] (Top level directory)
|- aareadme.txt        The file you are now reading.
|- errata.txt          Known anomalies and errors.
|- voldesc.cat         Contents description of this DVD volume.
|
|- [catalog]           Directory with PDS catalog information about
|   |                  the Cassini ISS datasets.
|   |- catinfo.txt     Description of files in the catalog directory.
|   |- cartods.cat     Cartographic map dataset description.
|   |- dsmap.cat       Description of map projections used.
|   |- issna_inst.cat  Cassini ISS narrow angle camera description.
|   |- isswa_inst.cat  Cassini ISS wide angle camera description.
|   |- insthost.cat    Cassini Orbiter description catalog object.
|   |- mission.cat     Mission description catalog objects.
|   |- person.cat      Cassini Imaging personnel objects.
|   |- projref.cat     Cassini project reference objects.
|   |- cartoref.cat    Cassini project reference objects.
|
|- [data]              Contains the EDR image data files and labels.
|   |- datainfo.txt    Description of files in the data directory.
|   - [maps]           Directory containing map sheets 
|   - [images]         Directory containing tile images and global mosaic.
|
|- [document]           Directory containing document files.
|   |- docinfo.txt      Description of files in document directory.
|   |- mapping_iss.pdf  Mapping publication released by ISS Team (PDF).
|   |- mapping_iss.html Mapping publication released by ISS Team (HTML).
|   |- mapping_iss.lbl  PDS detached label for mapping_iss document.
|   |- cartosis.lbl     PDS detached label for the mapping SIS.
|   |- cartosis.pdf     PDF version of the mapping SIS.
|   |- cartosis.txt     TXT version of the mapping SIS
|   - [mapping_iss_images] Directory containing images for mapping_iss.html.
|
|- [index]               Directory containing index files.
|   |- indxinfo.txt      Description of files in the index directory.
|   |- img_cumindex.tab  Cumulative index for /data/images/ PDS image files.
|   |- img_cumindex.lbl  PDS label for the img_cumindex.tab.
|   |- img_index.tab     Volume index for /data/images/ PDS image files.
|   |- img_index.lbl     PDS label for the img_index.tab.
|   |- map_cumindex.tab  Cumulative index for /data/maps/ PDF maps.  
|   |- map_cumindex.lbl  PDS label for the map_cumindex.tab 
|   |- map_index.tab     Volume index for /data/maps/ PDF maps.  
|   |- map_index.lbl     PDS label for the map_index.tab.
|
|- [label]             Directory containing labels and include files.
|   |- labinfo.txt     Description of label directory files.
|   |- vicar2.txt      Description of VICAR Label.





---------------------------------------------------------------------
4.  File Formats

This section describes the file formats used for the types of files found 
on these cartographic map volumes:

ASCII Text Files (.txt)
-----------------------
A flat, human-readable ASCII text version of each document must 
be included on the volume.  Also, adhering to PDS recommendations, 
plain text files have line lengths restricted to 78 characters or 
fewer in order to accommodate printing and display on standard devices. 
Each line is terminated by the two-character carriage-return/linefeed 
sequence, <CR><LF> (ASCII decimal character codes 13 and 10, respectively), 
for a maximum total line length of 80 characters.  Document .txt files 
are flat ASCII text files which may have embedded PDS labels (see PDS 
Label Formats below).


PDF Files (.pdf)
----------------
The full cartographic mapping product for a particular target body consists 
of one or more cartographic map sheets.  A map sheet will contain one or 
more images of different projections of the body.  Also included on the map 
sheet is text information describing the index of original images used to 
make the map, image processing used, a summary of the map projections, 
references, and contact information.  

These map sheets are stored as PDF (Portable Document Format) files. Portable 
Document Format (PDF) is a proprietary format of Adobe Systems Incorporated 
that is frequently used for distributing documents. Adobe offers a free 
downloadable reader, Acrobat Reader, from their website at 
http://www.adobe.com.  Be sure to download the latest version of Acrobat 
Reader to view the PDF files on the this volume.


PDS VICAR Files (.IMG)
-----------------------------
All tile images and the global mosaic image in the /data/images/ directory
are in JPL/MIPS VICAR (Video Image Communication And Retrieval) image 
format. (See 'Software' section below for more information.)

Each VICAR image file has an attached ASCII PDS label file. The label 
consists of ASCII 'keyword=value' pairs describing the important 
characteristics of the image.


Index Files (.tab)
------------------
The index table files contain keyword information about each data product 
(images and maps) on the volume.  

This file consists of fixed-length records in ASCII character format. Each 
line is a record containing all the keywords for a particular data product on 
the volume.  Fields in a record are delimited by commas. Non-numeric fields 
are enclosed in quotes and left-justified, whereas numeric fields are not 
enclosed by any characters and are right-justified.  Multi-valued fields are 
enclosed in brackets and each item in that field is separated by a comma.

The corresponding label files for each index file details the keyword name, 
data type, start byte, number of bytes, and format so that keywords can be 
easily referenced and the file can be properly read into a database.


Catalog Files (.cat)
--------------------
Catalog files (suffix .cat) exist in the catalog directory. They 
are text files formatted in an object-oriented structure consisting 
of sets of 'keyword=value' declarations. Each line is terminated by 
the two-character carriage-return/linefeed sequence, <CR><LF> (ASCII 
decimal character codes 13 and 10, respectively). PDS recommends 
catalog files have line length restricted to 72 characters or fewer, 
including the <CR><LF>, to accommodate PDS data ingestion 
requirements set forth by their internal catalogs and databases.





---------------------------------------------------------------------
5.  Contact Information

For questions concerning the Cassini ISS maps on this volume,
contact:

    PDS Imaging Node
    Susan K. LaVoie
    M/S 168-514
    Jet Propulsion Laboratory
    4800 Oak Grove Drive
    Pasadena, CA  91109-8099
    (818) 354-5677

    WWW Site:  http://pds-imaging.jpl.nasa.gov/
    E-mail:    feedback@pds-imaging.jpl.nasa.gov

For questions related to the Cassini Imaging Experiment
and related data analysis contact:

    Dr. Carolyn Porco
    Space Sciences Institute
    4750 Walnut Street
    Suite 205
    Boulder, CO 80301

    WWW Site: http://www.ciclops.org
    E-mail:   cpcomments@ciclops.org

For general information related to the PDS, contact:

    Planetary Data System, PDS Operator
    M/S 202-101
    Jet Propulsion Laboratory
    4800 Oak Grove Drive
    Pasadena, CA  91109-8099
    (818) 354-4321

    WWW Site:  http://pds.jpl.nasa.gov/
    E-mail:    pds_operator@jpl.nasa.gov





---------------------------------------------------------------------
6.  Cognizant Persons & Acknowledgments

This cartographic map archive volumes are being produced at the Cassini 
Imaging Central Laboratory for Operations (CICLOPS) located at Space Sciences 
Institute in Boulder, Colorado.

The map data are being processed at the Institute of Planetary Research, 
German Aerospace Center (DLR), Berlin, Germany and the  Remote Sensing of 
the Earth and Planets, Freie Universitat Berlin, Germany.  

Special thanks to R. Kirk (USGS) for the helpful discussions about the 
cartographic standards to use in the Cassini mapping activities and for 
reviewing the Voyager and Cassini maps.  Also, special thanks to Chris 
Isbell (USGS) for his early-on useful discussions on 'how to' archive 
cartographic mapping products.

